Importing Baseline Traffic Loads
This section describes how to prepare baseline load data and import the data into NetPlanner.
Table 5: Workflow for Importing Baseline Load Data
| Task | How to... |
|---|---|
| 1. Prepare for the import | Preparing for Import |
| 2. Import the data | General Importing Baseline Traffic Loads NetCollector “Import from NetCollector“ eXpress Data Import “Importing Baseline Loads“ - “CA eHealth Baseline Loads: Preparing for an Import“ - “InfoVista Link Loads: Preparing for an Import“ - “MRTG Link Loads: Preparing for an Import“ - “Performance Insight Link Loads: Preparing for an Import“ Other “Importing Baseline Load Traffic—ASCII Text File Format“ |
| 3. Verify the import | Verifying a Baseline Load Import |
| 4. Troubleshoot the import | Troubleshooting a Baseline Load Import |
After importing traffic, use the Traffic Center for Viewing and Managing Traffic Flows and Baseline Link Loads.
The baseline load import procedure is similar regardless of whether you are importing ASCII, MRTG, Performance Insight InfoVista, or CA eHealth–Network data.
Note: Importing from MRTG, Performance Insight, InfoVista, or CA eHealth–Network requires a license for the eXpress Data Import (XDI) module.
Procedure 11: Importing Baseline Load Data
-
Create traffic data files and do any additional steps required for the type of data you want to import:
- General – Importing Baseline Traffic Loads
- NetCollector – Importing the Network Traffic
- eXpress Data Import – Importing Baseline Loads
- CA eHealth Baseline Loads: Preparing for an Import
- InfoVista Link Loads: Preparing for an Import
- MRTG Link Loads: Preparing for an Import
- Performance Insight Link Loads: Preparing for an Import
- ASCII Baseline Load Imports
Note: Make sure do any preliminary steps required, as described in Preparing for Import.
-
Choose Traffic > Import Baseline Loads > From
<data_source>.Result: The Import Link Loads dialog box appears (see Figure 21).
-
In the “Select data source(s)” treeview, select the data sources (files or servers) that contain the data you want to import.
- To import data from external files, click Add Directory and select the data that contains the data files you want to import. Then expand the directory in the treeview and select the files.
- To import directly from a server, click Add Server and specify the hostname, login information, and other settings for that server. For more information, see Login and Data Sources for Direct CA eHealth-Network Imports.
Note: Direct imports are supported for eHealth–Network, MRTG, and Performance Insight only.
-
CA eHealth–Network import only: If you are importing from eHealth–Network for the first time, you must check the Import Aliases checkbox and then specify the eHealth–Network object (.dco) file you created using the eHealth–Network command line interface.
-
Set the other import options as desired (see Table 6 for more information).
-
Click OK to import the data.
-
If the Review Network Start Time dialog box appears after the import, you might need to change the network start time to ensure that all baseline load data is considered during a discrete event simulation or Flow Analysis.
-
When the Import Statistics dialog box appears, click View Log to open the Import Log.
-
If the Import Log indicates that any data of interest could not be imported, refer to Troubleshooting Traffic-Flow Imports.
-
Verify the import as described in Verifying a Baseline Load Import on page ITG-2-51.
For more information, see Configuring Baseline Load Import.