status

Abstract

Displays the list of pending breakpoints, traces, and actions, in the order they were set.

Syntax

status

Argument Type Description
no arguments

Details

The list displayed by status precedes each breakpoint with its corresponding breakpoint ID, and each trace with its corresponding trace ID. The list includes suspended breakpoints and traces, which are indicated by the additional text “(suspended)”. Breakpoints can be set using the ODB commands listed in Table 7 “Basic Breakpoint-Setting Commands” on page 45. Breakpoints can be suspended by suspstop, reactivated by actstop, and deleted by delstop. Traces can be set using the ODB commands listed in Table 11 “Basic Trace-Setting Commands” on page 50. Traces can be suspended by susptrace, reactivated by acttrace, and deleted by deltrace.

An alias for an earlier version of this command is supported (showtraces).

Example

ODB> status

Breakpoints :
          3)  stop at event in module (top.ABR_N_Source_Configuration.wkstn_SantaClara.traf_src [Objid=1148])
          4)  stop at (remote intrpt) for module (top.ABR_N_Source_Configuration.wkstn_SantaClara.traf_src [Objid=1148])
          5)  stop at time = (0.023) sec.


Traces :
     Full trace is disabled
     Encapsulation trace is enabled
     Execution trace is disabled
     Trace format: indented

          0)  trace on packet with ID (125) (packet not in system)


Actions :
     None


Miscellaneous :
     Memory tagging is disabled

本站文档由 北京智网畅联科技有限公司 整理、翻译并提供 · Documentation compiled and provided by Beijing ZNetLink Technology Co., Ltd.

交流群 · QQ Group:OPNET/智网妙算网络仿真交流群(群号 486383494)

原文档 © 2017 Riverbed Technology · 本站为公益翻译,由 AI 辅助完成,请仔细甄别

Original documentation © 2017 Riverbed Technology. Community translation, AI-assisted. Contact: jiazequn@znetlink.com