xmitlimit

Abstract

Sets or displays the limit on the number of recorded transmissions for specified channels.

Syntax

xmitlimit <operation> <obj>[/<type>]

Argument Type Description
<operation> string specifies whether this command will set or display the limit. Values are:
- get – display the limit for specified objects
- set=<limit> – set the limit for specified objects. <limit> must be >= 0.
<obj> string specifies which transceiver channels the command should operate on. Values are:
- all – all wireless transceiver channels in the scenario
- ratxch – all wireless transmitter channels in the scenario
- rarxch – all wireless receiver channels in the scenario
- <object ID> – all wireless transceiver channels in the object and its subobjects. The specified object must be a subnet, node, module, or channel. The channels can be further restricted with <type>.
<type> string [optional; valid only with object ID] restricts the channels operated on to only transmitter or receiver channels. Values are:
- ratxch – transmitter channels only
- rarxch – receiver channels only

Details

This command lets you either set the maximum number of transmissions that will be recorded for specified radio channels or see the current value. By limiting the number of applicable wireless transmissions that will be recorded for analysis, you can control the amount of memory used by this feature.

Example

ODB> xmitlimit set=3 453/ratxch
176 objects matched:
 Objid Limit Hierarchical Path
60,566     3 Airport Network.Concourse E.Gate E4 AP.wlan_port_tx_1_0.channel [0]
60,567     3 Airport Network.Concourse E.Gate E4 AP.wlan_port_tx_1_0.channel [1]
60,773     3 Airport Network.Concourse E.Gate E2 AP.wlan_port_tx_1_0.channel [0]

本站文档由 北京智网畅联科技有限公司 整理、翻译并提供 · Documentation compiled and provided by Beijing ZNetLink Technology Co., Ltd.

交流群 · QQ Group:OPNET/智网妙算网络仿真交流群(群号 486383494)

原文档 © 2017 Riverbed Technology · 本站为公益翻译,由 AI 辅助完成,请仔细甄别

Original documentation © 2017 Riverbed Technology. Community translation, AI-assisted. Contact: jiazequn@znetlink.com