acttrace

Abstract

Reactivates a trace that was previously suspended by the ODB command susptrace.

Syntax

acttrace <trace_id> | all

Argument Type Description
<trace_id> integer numeric trace ID of the trace-of-interest
A trace ID can be obtained for this argument by using the ODB command status, which lists all pending traces in numeric order.
all n/a Reactivate all suspended traces.

Details

Reactivation of a trace cancels out the effect of suspension, enabling the trace to be active when its conditions are matched. The example below assumes that several traces have been previously set, and that the packet trace set for packet ID 15 has been suspended.

Example

ODB> status

Breakpoints :
          None


Traces :
          Full trace is disabled
          Encapsulation trace is enabled
          Execution trace is disabled
          Trace format: indented

              0)  trace on packet with ID (45) (packet in system)
              1)  trace on packets with tree ID (46) (1 such packets)
              2)  trace on module (top.pksw1.node_0.xmt) (suspended)


Actions :
          None


Miscellaneous :
          Memory tagging is disabled


ODB> acttrace 2
"trace on module (top.pksw1.node_0.xmt)" is reenabled.

ODB> status

Breakpoints :
          None


Traces :
          Full trace is disabled
          Encapsulation trace is enabled
          Execution trace is disabled
          Trace format: indented

              0)  trace on packet with ID (45) (packet in system)
              1)  trace on packets with tree ID (46) (1 such packets)
              2)  trace on module (top.pksw1.node_0.xmt)


Actions :
          None


Miscellaneous :
          Memory tagging is disabled

本站文档由 北京智网畅联科技有限公司 整理、翻译并提供 · Documentation compiled and provided by Beijing ZNetLink Technology Co., Ltd.

交流群 · QQ Group:OPNET/智网妙算网络仿真交流群(群号 486383494)

原文档 © 2017 Riverbed Technology · 本站为公益翻译,由 AI 辅助完成,请仔细甄别

Original documentation © 2017 Riverbed Technology. Community translation, AI-assisted. Contact: jiazequn@znetlink.com