prostop
Abstract
Sets a breakpoint that will stop the simulation when the specified process is about to be invoked or, optionally, when a specific interrupt occurs for the process.
Syntax
prostop <process_id> [<intrpt> [<options>]]
| Argument | Type | Description |
|---|---|---|
<process_id> |
integer | numeric process ID of the process-of-interest A process ID can be obtained by using the ODB commands objprint or promap, which both display lists of the existing processes associated with a specific module. |
<intrpt> |
string | [optional] type of the interrupt to trap A list of interrupt type keywords appears in the Details section of the intstop command. |
<options> |
int | [optional] additional interrupt-specific arguments limiting which interrupts will trigger breakpoints. See the intstop command for details. |
Details
Processors and queues may create multiple processes using the KP op_pro_create() to model subsystems operating within a module. Setting a breakpoint for a specific process supports the detailed analysis of the invocations of the process without incurring the overhead of breakpointing on every interrupt received by the surrounding module. Process breakpoints are indefinite, because they remain on the pending breakpoint list after being trapped. Breakpoints may be suspended by the command suspstop, reactivated by actstop, or deleted by delstop.
Example
ODB> prostop 5
Added breakpoint #0: stop at invocation of process (5)
ODB> status
Breakpoints :
0) stop at invocation of process (5)
Traces :
Full trace is disabled
Encapsulation trace is enabled
Execution trace is disabled
Trace format: indented
No other traces
Actions :
None
Miscellaneous :
Memory tagging is disabled
ODB> cont
__________________________ (ODB 18.6.0: Event) ____________________________
* Time : 2.55968921051 sec, [2s . 559ms 689us 210ns 508ps]
* Event : execution ID (51), schedule ID (#69), type (stream intrpt)
* Source : execution ID (50), top.pksw2.hub.rcv0 (pt-pt receiver)
* Data : instrm (0), packet ID (3)
> Module : top.pksw2.hub.hub [Objid=24] (processor) [process id: 5]
breakpoint #0 trapped : "stop at invocation of process (5)"