Import from NetCollector—Procedure
Use the following procedure to import topology and traffic from NetCollector.
Procedure 3: Import from NetCollector
-
Start NetCollector if it is not already running.
Services must be running to import from NetCollector. See the NetCollector User Guide for more information.
-
You can import your NetCollector topology using one of the following methods:
- To import into a new scenario: Choose Import from NetCollector in the Initial Topology window of the Startup Wizard.
- To import into an existing scenario: From the Topology menu, choose Import Topology > From NetCollector… (Remember that importing into an existing scenario overwrites the original contents.)
Result: The Import from NetCollector Enter NetCollector name dialog box appears.
-
Enter the NetCollector name and click OK.
Result: The Import from NetCollector dialog box appears.
-
Specify import options, as described in this section.
-
Click Import.
5.1 NetPlanner imports the topology and traffic (if selected).
Note: If you chose to include “show ip route” information, the routing tables are stored in files, as follows: <reldir>\op_models\tmp\<project>-<scenario>.cfd.dir\<device_name>.iproute