Point-to-Point Transmitter Object
Point-to-point transmitter objects act as the exit points of a node for packets forwarded on point-to-point links. They can contain multiple channel objects, each of which is able to transmit packets to a corresponding receiver channel in another node via a point-to-point link. Point-to-point transmitters forward packets while taking into account transmission delay and providing queuing for those packets that arrive before the transmitter channel is free. Packets are queued on a per-channel basis in queues with a user-definable capacity. See Chapter 9 "Communication Mechanisms" on page 331 for more information about queuing in transmitter channels.
Transmitters have multiple input streams, each one corresponding to a separate channel of the point-to-point link, and each connected to a separate packet stream object originating at other modules in the node. There is a direct correspondence between input stream indices and channel indices. In other words, a packet which is sent to the point-to-point transmitter on input stream j is forwarded on channel j of the point-to-point link. Point-to-point transmitters are considered as data sinks from the perspective of other modules within the node, so they may not have outgoing packet streams.
Graphical Representation
In the Node Editor, a default point-to-point transmitter consists of a square with a circle that represents the node and an arrow that points away from the node to represent the point-to-point link. The name of the transmitter appears below the square, as shown in the following figure.
Figure 10: Point-to-Point Transmitter

Point-to-point transmitter objects are the interface between a node and a point-to-point link. Many of the parameters controlling the modeling of packet transmission across a point-to-point link are attributes of the link object in the network domain and are not visible on the transmitter object. These are attributes such as bit error rate and propagation delay, and also stages of the point-to-point link transceiver pipeline (see Chapter 9 "Communication Mechanisms" on page 331).
Point-to-Point Transmitter Object Attributes
The following table lists the built-in attributes of a point-to-point transmitter object.
Table 19: Point-to-Point Transmitter Object Built-In Attributes
| Name | Data Type |
|---|---|
| channel | compound |
| icon name | icon |
| name | string |