Point-to-Point Receiver Object
Point-to-point receiver objects act as the entry points of a node for packets received on point-to-point links. They can contain multiple channel objects, each of which can receive packets from a corresponding transmitter channel in a remote node via a point-to-point link.
Receivers support multiple output streams, each corresponding to a separate channel of the point-to-point link. Each output stream can be connected to another module in the node to which the received packets will be forwarded. There is a direct correspondence between output stream indices and channel indices. In other words, a packet which is received on channel j of the point-to-point link is forwarded on output stream j of the point-to-point receiver module. Point-to-point receivers are considered as data sources from the perspective of other modules within the node, so they may not have incoming packet streams.
Graphical Representation
In the Node Editor, a default point-to-point receiver consists of a square with part a circle inside to represent the node and an arrow that points into the circle to represent the point-to-point link. The name of the receiver appears below the square, as shown in the following figure.
Figure 9: Point-to-Point Receiver

Many of the parameters controlling the modeling of packet transmission across a point-to-point link are attributes of the link object in the network domain and are not visible on the receiver object. These are attributes such as bit error rate and propagation delay, and also stages of the point-to-point link transceiver pipeline. For information about the transceiver pipeline, see Chapter 9 "Communication Mechanisms" on page 331.
Point-to-Point Receiver Object Attributes
The following table lists the built-in attributes of a point-to-point receiver object.
Table 15: Point-to-Point Receiver Object Built-In Attributes
| Name | Data Type |
|---|---|
| channel | compound |
| ecc threshold | double |
| icon name | string |
| name | string |