Bus Transmitter Object

Bus transmitter objects act as the exit points of a node for packets forwarded on bus communication links. They can contain multiple channel objects, each of which can forward packets to corresponding bus receiver channel objects in other nodes attached to the same bus link. Bus transmitters forward packets while taking into account transmission delay and providing queuing for those packets which arrive before the channel is available. Packets are queued on a per-channel basis in queues with a user-definable capacity. For more information about queuing in transmitter channels, see Chapter 9 "Communication Mechanisms" on page 331.

Transmitters may have multiple input streams, each one corresponding to a separate channel of the bus link, and each connected to a separate packet stream. The packet streams originate at other modules in the node. There is a direct correspondence between input stream indices and channel indices. In other words, a packet that is sent to the bus transmitter on input stream j is forwarded on channel j of the bus link. Bus transmitters are considered to be "data sinks" from the perspective of other modules within the node, so they may not have outgoing packet streams.

Graphical Representation

In the Node Editor, the default representation of a bus transmitter is a square box with a circle that represents the node, and an arrow pointing away from the node that represents the tap, and a vertical bar that represents the bus link. The name of the transmitter appears below the object, as shown in the following figure.

Figure 4: Bus Transmitter

Bus Transmitter

Bus transmitter objects are the interface between a node and a bus link. Many of the parameters controlling the modeling of packet transmission across a bus link are attributes of the bus link object in the Network Domain and are not visible on the transmitter object. These are attributes such as bit error rate and propagation delay, and also stages of the bus link transceiver pipeline.

For more information about the transmitter pipeline, see Chapter 9 "Communication Mechanisms" on page 331.

Bus Transmitter Object Attributes

The following table lists the built-in attributes of the bus transmitter object.

Table 7: Bus Transmitter Object Built-In Attributes

Name Data Type
channel compound
icon name icon
name string

本站文档由 北京智网畅联科技有限公司 整理、翻译并提供 · Documentation compiled and provided by Beijing ZNetLink Technology Co., Ltd.

交流群 · QQ Group:OPNET/智网妙算网络仿真交流群(群号 486383494)

原文档 © 2017 Riverbed Technology · 本站为公益翻译,由 AI 辅助完成,请仔细甄别

Original documentation © 2017 Riverbed Technology. Community translation, AI-assisted. Contact: jiazequn@znetlink.com