Managing Redundant Traffic Data

Redundant traffic information typically occurs when collecting in multiple phases. By “redundant”, we mean that two or more distinct traffic profiles are collected for the same pair of hosts, but at different times. If this happens for a particular pair of hosts, it is likely to happen for many in your network.

The traffic collection strategies described above favor collection at the “edges” of the network. The edges are the LANs, or the routers associated with those LANs, if you collect aggregated traffic for several LANs at a time. Collecting at the edges helps minimize redundant traffic information, when compared with collecting in the core of the network (that is, within a router mesh connecting the LANs). However, collection in multiple phases, can cause a segment to have its traffic included more than one phase. Indeed, this is almost impossible to avoid if each segment is being probed, or even with aggregation, because a segment will be directly monitored on one collection phase, but appear as a remote source/destination of traffic, when a data collection device is applied to other parts of the network in a later phase.

The “Import Traffic” feature lets you specify how you want to resolve redundant traffic. You are provided with several options: a) use the higher of the collected traffic volumes at any point over the collection interval; b) use the sum of the traffic; and c) use the lowest recorded traffic level. In practice, option (c) is rarely used, but both options (a), and (b) have appropriate applications. Suppose, for example, that we have collected traffic twice for a particular pair of hosts, X and Y. Using the higher of the two traffic volumes reflects a conservative, or “worst-case” approach, where the network is assumed to be carrying more load. Approach (b) would be applied if the two traffic flows were considered possible to have occurred simultaneously. This would occur if collection devices were placed within the core of the network and traffic between two hosts can split on to multiple paths, which is possible with certain routing protocols, such as OSPF, or IGRP.