Importing Cisco Aironet Wireless Access Points: Introduction
Cisco Aironet wireless access points provide secure wireless capabilities supporting 802.11 a/b/g connectivity. Aironet wireless access points may be implemented in an operational network using either a structured wireless aware network (SWAN) infrastructure or Cisco's unified wireless network (UWN). NetPlanner supports only the SWAN infrastructure.
To collect the information from the Aironet wireless access points, you must run the following adapters on the NetCollector:
Note: For more information about the adapter, see the Adapters chapter of the NetCollector User Guide.
- Device Configuration File Import
- Device Version Import
- Device Interface Import
- Device CDP Import
- Link and connection Interface
- Export Services
You can then import the configuration of the Aironet wireless access points into NetPlanner from NetCollector. Select the "Include collected configuration files" and "Append operational data" checkboxes on the Options tab to import all configuration information. On the Topology tab you can select either Import Detailed Attributes or Import Minimal Attributes, depending on how much data you need to import.
Figure 161: Import Cisco Aironet Wireless Access Points from NetCollector

System Requirements for Import of Cisco Aironet Wireless Access Points
Cisco Aironet wireless access points are supported for the following products:
- NetPlanner 18.5 PL5 or later
- NetCollector 6.5 PL1 or later