Model Interfaces: ATM
The following sections discuss the topics necessary for interfacing with the ATM model.
Packet Formats: ATM
The following table lists the packet formats used in the ATM model and gives a brief description of each.
Table 22: ATM Packet Formats
| Name | Description |
|---|---|
ams_aal5_cpcs_pdu |
AAL 5 PDU encapsulating an AAL 5 client SDU for transfer to the ATM layer. |
ams_aal_signal |
Carries signals within the Signaling AAL process model. |
ams_atm_call_proceeding |
Control data used to send CALL PROCEEDING message for ATM signaling protocol. |
ams_atm_cell |
ATM data cell. |
ams_atm_connect_v2 |
Control data used to send CONNECT message for ATM signaling protocol. |
ams_atm_connect_ack |
Control data used to send CONNECT_ACK message for ATM signaling protocol. |
ams_atm_dr |
Control cell used to implement dynamic routing within ATM. |
ams_atm_release |
Control data used to send RELEASE message for ATM signaling protocol. |
ams_atm_release_complete |
Control data used to send RELEASE message for ATM signaling protocol. |
ams_atm_rm |
Resource management cell that carries feedback information. |
ams_atm_setup_v2 |
Control data used to send RELEASE message for ATM signaling protocol. |
ICI Formats: ATM
The following table describes the interface control information (ICI) formats used in the ATM model suite.
Table 23: ATM ICI Formats
| Name | Description |
|---|---|
ams_aal_handle |
Contains the AAL and SAAL process handles associated with a virtual connection. Passed to ATM as an upper layer handle and to a client as a lower layer handle within ams_if_ici_v2 during call establishment and release. |
ams_aal_request |
Used within AAL to store incoming setup requests. It contains the ams_if_ici_v2 described below, as well as an interrupt code, and the object ID of the module or node sending the setup request. |
ams_atm_handle |
Passed as a lower layer handle within the ams_if_ici_v2 by ATM to forward state information associated with a call to AAL. It is returned to ATM during data transfer and call release. |
ams_if_ici_v2 |
Used within AMS to pass establish and release messages between the layers of a node. |
ams_ipif_handle |
Passed as an upper layer handle within the ams_if_ici_v2 by the ams_ipif_v4 process to forward connection information to AAL. |
ams_neighbor_notify |
Carries neighbor notify messages between the modules of an AMS node model. |
ams_saal_ici |
Used within AAL to pass signal packets to a SAAL process. |