Configuring Tunneling Through SPVP/PVP

A virtual path or a stitched sequence of virtual paths (see Configuring a Sequence of Stitched PVC/PVPs) appears as a virtual ATM trunk over which circuits may be routed. The dynamic routing protocols may use this trunk as a hop in an ATM circuit, or hard PVCs may use it for static configurations. Soft PVCs cannot be forced through a virtual trunk in the model; they will only be tunneled through the trunk if the dynamic routing protocol determines the trunk to be a segment in the shortest path.

Note: This feature is supported for Flow Analysis only

Tunnelling of a hard PVC through a virtual trunk can be achieved in several ways:

  • When configuring the hard PVC path, use the name of the SPVP/PVP as a port name under the Incoming Parameters.Port and the Outgoing Parameters.Port attributes. Treat the PVP as any other ATM port and proceed with the PVX Circuit attribute configuration as usual.

  • A PVC will be tunneled through a PVP if the VPI in the Output Parameters of a node hop specified in the path of the hard PVC matches

    • the VPI of the Ingress Parameters of a PVP that originates at the next hop or
    • the VPI of the Egress Parameters of a PVP that terminates the next hop.

    Similarly, the PVC will be tunneled through the PVP if the VPI of the Input Parameters of a node hop specified in the path of a hard PVC matches

    • the VPI of the Ingress Parameters of a PVP that originates at the previous hop or
    • the VPI of the Egress Parameters of a PVP that terminates at the previous hop.

Note: Notice that in this configuration, the VCI needs to be at specified as well as the VPI at the point of tunneling in the PVX Circuit attribute of the PVC.

  • A PVC will be tunneled through a PVP if the VPI/Port in the Output Parameters of a node hop specified in the path of a hard PVC matches

    • the VPI/Port of the Output Parameters of the first hop of a hard PVP or
    • the VPI / Port of the Input Parameters of the last hop of a hard PVP.

    Similarly, the PVC will be tunneled through the PVP if the VPI/Port in the Output Parameters of a PVC hop at a switch matches

    • the VPI/Port of the Output Parameters of the first hop of a hard PVP or
    • the VPI / Port of the Input Parameters of the last hop of a hard PVP