Routing Protocol Attributes
In DES, switches in the ATM model suite by default use a dynamic routing protocol—ATM Distance Vector Routing—which is implemented as a distributed, asynchronous adaptation of the Bellman-Ford shortest path algorithm. When the ATM signaling layer receives a call setup request, the source node finds a route to the call destination.
In Flow Analysis, the default routing protocol is PNNI, though Distance Vector Routing is also supported. For more information on configuring PNNI routing, refer to "PNNI".
The following attributes are used to configure distance vector routing in DES.
Routing Update Interval. This attribute specifies the time between regular routing updates. Routing tables are periodically updated to ensure that all nodes are aware of the latest topology changes.
Active and Passive Failure Detection Modes. Failures and recoveries in the network must be detected by nodes adjacent to the failure or recovery point. These (adjacent) nodes must then inform other nodes in the network of the failure or recovery.
- active failure detection mode: the routing process detects a neighbor node or link failure/recovery and updates its routing tables immediately. The node sends out route advertisements that reflect its updated routing table.
- passive failure detection mode: failure is detected implicitly when no route costs have been received in two or more route update periods.
See "PNNI" for details on PNNI parameters.