Link Aggregation
The link aggregation model implements the Link Aggregation Control Protocol (LACP) specified in section 43 of the IEEE 802.3-2002 standard. Cisco's EtherChannel is a form of link aggregation. In link aggregation, two or more Ethernet links of the same speed that connect a pair of nodes are aggregated to form a link aggregation group. These groups are treated as a single link by MAC client layers such as spanning tree protocols. LACP performs conversation-based load sharing among the links of the group.
Without link aggregation, multiple links between a pair of nodes does not increase the available bandwidth between the nodes. The spanning tree algorithm blocks the ports connected to the extra links to prevent routing loops. When links are aggregated by LACP, the spanning tree algorithm sees a single link with the combined bandwidth. LACP distributes the traffic among the component links using a configurable algorithm. Because LACP provides a single logical link to its clients, the spanning tree is not susceptible to the failures of individual links within the aggregated link. The spanning tree is only impacted if all of the member links fail (or, if all of the links are down, when one of them recovers).
Figure 313: Aggregating Links Between Two Nodes

Link Aggregation modeling topics: