Types of Connections
The model supports the connection types described in this section.
PVPs and SPVPs
PVPs are hard-coded “pipes” of bandwidth that are reserved in advance between a source-destination pair. SPVPs are like PVPs except that the pipes are signalled rather than hard-coded. You can set up multiple virtual circuits within a pipe, as long as enough bandwidth exists in the pipe.
While Flow Analysis provides full support for PVPs, including dynamic routing of circuits over PVPs, DES provides limited support in that it allows an SVC to be brought up in the PVP tunnel by a traffic-generating node, if an appropriate path exists to the destination. In these cases, the virtual path should be modeled using the atm_spvx or atm_pvx connection model with its "Type" attribute set to PVP.
PVC and SPVCs
PVCs are hard-coded “channels” of bandwidth that are reserved for a specified time between a source-destination pair. SPVCs are like PVCs except that the channels are signalled rather than hard-coded. When a PVC is set up, all application traffic to the specified destination uses the PVC. PVCs remain in place for the duration of the simulation.
SVC
(DES only). When application traffic starts, an SVC is automatically set up according to the application’s traffic contract specifications and the application’s traffic flows through that SVC. When the application session ends, the SVC is torn down.