Adding Network Traffic to an LTE Model
After you have created the LTE network topology, you can introduce traffic into the model. You can do this through the use of discrete application traffic (including standard application models such as FTP and E-mail, custom applications, and application demands). The model does not support raw packet generation.
Application support is included in the UEs (workstation and server models). For more information, see “Applications” on page 1.
Network Addressing Support
Both IPv4 and IPv6 addressing are supported. Note the following:
- The loopback interface address of the EPC and UE must be in the same network
- A given LTE network may only have one technology in use at a time (IPv4 or IPv6). In other words, an EPC with all of its eNodeBs and UEs must use the same technology.
- Auto-assignment of IP addresses is supported for LTE networks that use IPv4 technology. In LTE networks that use IPv6 technology, IP addresses must be manually assigned.
Application Delay Tracking
The LTE model supports Application Delay Tracking (ADT), which can help you identify the sources of application delay in a discrete event simulation. For more information about using ADT, see “Tracking Application Delays” on page 304.