OPNET 文档
中文
Documentation Home
  • License and Installation Support
  • Modeling Concepts
  • Models
    • Process Model/Queuing
    • Process Model/General
    • Pipeline Stages/Bus Link
    • Pipeline Stages/Point-to-Point Links
    • Packet Conversion
    • Model Support
    • Applications
    • Cyber Effects
    • Mainframe
    • RPG
    • Server
    • ATM
    • Ethernet
    • FDDI
    • Frame Relay
    • ISDN/xDSL
    • LANE
    • LAPB
    • Link Aggregation
    • SRP
    • Spanning Tree Bridge
    • Token Ring
    • VLAN
    • X.25
    • APS
    • H.323
    • HAIPE
    • IP
    • IP Multicast
    • IP QoS
    • IPv6
    • RSVP
    • BGP
    • EIGRP
    • IGRP
    • IS-IS
    • MPLS
    • OSPF
    • PNNI
    • RIP
    • Software-Defined Networking
    • TCP
    • TPAL
    • LTE
      • LTE
      • LTE Model Features
      • EPS Bearer Definitions
      • Service Data Flow Classification
      • EPS Session Management (ESM)
      • Broadcast and Multicast Traffic
      • Packet Data Convergence Protocol (PDCP)
      • Radio Link Control (RLC)
      • Medium Access Control (MAC)
      • Physical Layer
      • Hybrid Automatic Retransmission Request (HARQ)
      • Channel Quality Indicator (CQI) and Link Rate Adaptation
      • Admission Control
      • EPS Mobility Management (EMM)
      • eNodeB Failure and Recovery Support
      • LTE Model Assumptions
      • General Assumptions
      • Architectural and Operational Assumptions for Mobility Management
      • LTE Model Limitations
      • LTE Model Unsupported Features
      • LTE Node Models
      • Configuring LTE
      • Creating the LTE Topology
      • Viewing the LTE Configuration
      • Adding Network Traffic to an LTE Model
      • Running a Simulation for LTE
      • Analyzing LTE Networks
      • LTE Statistics
      • Available Reports for LTE
      • Visualizing LTE in the Project Editor
      • LTE Reference Documents
    • MANET
    • SMART MAC
    • Advanced Wireless Package
    • TDMA
    • UMTS
    • WiMAX (802.16e)
    • Wireless LAN
    • ZigBee
    • General Models Reference
    • Model Library
  • Modules
  • Modeler Tutorials
  • Working with Discrete Event Simulation Models
  • Notices
  • Programmers Reference
  • About ZNetLink
Home/Models/Configuring LTE

Configuring LTE

This section describes how to configure LTE in your network model. The typical configuration steps include

  • Creating the LTE Topology
  • Viewing the LTE Configuration
  • Adding Network Traffic to an LTE Model
  • Running a Simulation for LTE
← PreviousLTE Node Models Next →Creating the LTE Topology

本站文档由 北京智网畅联科技有限公司 整理、翻译并提供 · Documentation compiled and provided by Beijing ZNetLink Technology Co., Ltd.

交流群 · QQ Group:OPNET/智网妙算网络仿真交流群(群号 486383494)

原文档 © 2017 Riverbed Technology · 本站为公益翻译,由 AI 辅助完成,请仔细甄别

Original documentation © 2017 Riverbed Technology. Community translation, AI-assisted. Contact: jiazequn@znetlink.com