Editing Jobs

After you import data into a Server Characterization model, you can edit jobs and the processes and threads that make up the jobs.

Processes and threads are defined as follows:

  • Processes are allocated a virtual address space to hold the process image; processes have protected access to processors, other processes, files, and I/O resources. Processes own the resources they use.
  • Threads are lightweight processes that have execution paths, execution states, and access to the memory address space and the resources of the processes to which they belong. Because threads share the resources of a process, threads take less time to create, communicate, switch between threads in the same process, and terminate.

Within Server Characterization Editor, processes and threads are interchangeable. Depending on the data collector you used, you might not have access to specific threads.

In the editor window, you can

  • remove
    • a selected job or all jobs
    • selected processes/threads from a job
    • all processes/threads from a job
    • all processes/threads from all jobs
  • add processes/threads to a job
  • move processes/threads between jobs

Removing a Job

You can remove (delete) a job from a Server Characterization model using the main menu or the Delete Job toolbar button. The following procedure uses the command in the main menu.

Procedure 12: Removing a Job

  1. In the Jobs pane, select the job you want to remove.

    The job name becomes highlighted.

  2. From the main menu, select Jobs > Remove Job.

    The Confirm dialog box appears with the message

    Delete job “job_name”?

  3. Click OK.

    The job is removed from the job list and the processes/threads that were associated with that job move from the Job Processes/Threads pane to the Unallocated Processes/Threads pane.

To perform the same operation using the toolbar button, see “Server Characterization Editor Toolbar Buttons” on page 10.

Removing or Adding Processes/Threads

You can remove processes/threads from a job or add processes/threads to a job. Any processes or threads that you remove from a job are retained by the editor in the Unallocated Processes/Threads pane for use in other jobs.

You can remove and add processes/threads manually—as described in the next two procedures—or you can remove processes/threads automatically using the Jobs > Clear Job/Clear All Jobs menu items and add processes/threads with filters (see Adding Processes/Threads to a Job Using Filters).

Removing Processes/Threads from a Job

You can remove selected processes/threads from a job one at a time or remove all processes/threads from a job in one operation. The following procedure describes how to remove a selected process/thread manually.

Procedure 13: Removing Processes/Threads from a Job

  1. In the Jobs pane, select the job you want to edit.

    The job name becomes highlighted, and the processes/threads allocated to that job appear in the Job Processes/Threads pane.

  2. Select an item in the Job Processes/Threads pane of the editor window; selecting any attribute in a line selects that line.

    The item you select becomes highlighted.

  3. Click the down arrow below the Job Processes/Threads pane.

    The selected line is removed from the Job Processes/Threads pane and appears in the Unallocated Processes/Threads pane.

To remove all the processes/threads from a job in one operation, select Jobs > Clear Job from the main menu or click on the Clear Job toolbar button (see “Server Characterization Editor Toolbar Buttons” on page 10.)

Adding Processes/Threads to a Job

You can add selected processes/threads to a job one at a time or in one operation. The following procedure describes how to add processes/threads manually.

Procedure 14: Add Processes/Threads to a Job

  1. In the Jobs pane, select the job to which you want to add processes/threads.

    The job name becomes highlighted and the processes/threads that make up that job appear in the Job Processes/Threads pane.

  2. Select an item in the Unallocated Processes/Threads pane that you want to add to the selected job.

    The item you selected becomes highlighted.

  3. Click the up arrow above the Unallocated Processes/Threads pane.

    The selected line moves from the Unallocated Processes/Threads pane to the bottom of the list in the Job Processes/Threads pane.

Adding Processes/Threads to a Job Using Filters

You can move multiple processes/threads from the Unallocated Processes/Threads pane into multiple jobs in one operation using filters.

After you create filters and define their actions, you can store them in the Filter Library. You can use the filters individually or in groups to filter the processes/threads from a pool of data into multiple jobs.

Procedure 15: Adding Processes/Threads to a Job Using Filters

  1. With a Server Characterization model open in the editor, select Manage Filters from the main menu or click on the Manage Filters toolbar button (see “Server Characterization Editor Toolbar Buttons” on page 10.)

    The Filters dialog box appears.

  2. Select a filter to use from the list under the Filter Libraries heading of the dialog box and click the Add Filter button.

    The name of the filter you selected appears in the Thread Filters list.

  3. Repeat step 2 for each filter you want to use, then click OK to close the dialog box when you finish your filter list.

  4. Use the Move Up and Move Down buttons to arrange the filters in the order you want the filtering actions to take place.

    Riverbed Modeler applies the filters to the unallocated data in order from the top of the Thread Filters list to the bottom. For more information, see Managing Filters.

  5. Select Filters > Apply Filters from the main menu or click on the Apply Filters toolbar button (see “Server Characterization Editor Toolbar Buttons” on page 10.)

    The filters that you added to the Thread Filters list act on the data in the Unallocated Processes/Threads pane and move data to the correct job(s) according to filter criteria.

For information about creating, editing, and storing filters, see Managing Filters.

本站文档由 北京智网畅联科技有限公司 整理、翻译并提供 · Documentation compiled and provided by Beijing ZNetLink Technology Co., Ltd.

交流群 · QQ Group:OPNET/智网妙算网络仿真交流群(群号 486383494)

原文档 © 2017 Riverbed Technology · 本站为公益翻译,由 AI 辅助完成,请仔细甄别

Original documentation © 2017 Riverbed Technology. Community translation, AI-assisted. Contact: jiazequn@znetlink.com