Operations

Typical Workflow

These are the basic steps to follow when using the Urban Propagation Module.

  1. Obtain a 3-D model of the simulation environment.

    The file should be in the COLLADA format (.dae). Files in this format can be created with most common 3-D modeling applications, such as SketchUp, AutoCAD, and Vectorworks. For COLLADA models from the 3D Warehouse (sketchup.google.com/3dwarehouse), download both the Sketchup and Collada files.

  2. Open (or create) a project in Riverbed Modeler.

    The project should include a subnet with units of meters. The subnet should have at least one transmitter and one receiver, so that some wireless traffic will be generated during the initial simulation run. All nodes should be located within the geographic extent of the 3-D model file and the transmitter should be as close to the desired location as possible.

  3. Create a parameter set for the URBAN propagation model that specifies the location and name of the 3-D model file and the desired resolution.

  4. Generate an image map from the 3-D model and add it to the network model. Use the image to reposition the nodes precisely where needed.

  5. Configure the materials database (optional).

  6. Run a preliminary simulation with some wireless traffic.

    During this simulation, various support files (as listed in Table 4) are generated from the 3-D model and path loss is calculated for each voxel.

    Note: The simulation (particularly the writing results step) can take a long time. It might require several hours, depending on the complexity and size of the 3-D model, the number of transmitters, and the specified resolution.

  7. Run production simulations.

    Because these simulations use the saved power database, they will run very quickly. (If you have moved the transmitter to a different voxel, however, there will be another wait in the first simulation while a new power database is generated.)