Getting Started

Wireless functionality allows you to simulate networks that include moving sites (both nodes and subnetworks), radio communications, or both.

Note: This manual assumes you are familiar with Riverbed Modeler. It also assumes you are familiar with the operating system on which you are running Modeler. Finally, you should have a general understanding of wireless networks and, if you will be using Modeler’s capabilities to develop your own models, a knowledge of C or C++ programming.

The Wireless functionality expands your simulation capabilities to include wireless LANs, cellular telephone networks, satellites, and many other situations typical of modern communications.

Wireless modeling includes the following features:

  • Moving Sites – The Wireless functionality supplements fixed sites (both nodes and subnetworks) with two new types: mobile and satellite. Mobile sites can be assigned predefined trajectories that specify their positions as a function of time throughout a simulation run. Similarly, satellite sites are assigned orbits that prescribe their motion. You create trajectories within Modeler itself; orbits are created outside Modeler and imported. In addition to using trajectories or orbits, Riverbed Modeler users can move sites by directly setting their x position, y position, and altitude attributes.
  • Radio Links – With wireless modeling, fixed, mobile, and satellite sites communicate with each other via radio links. Unlike bus and point-to-point links (which are modeled as explicit objects that you must create), radio links are dynamically evaluated based on characteristics of the communicating sites. The characteristics and even the availability of these links can be subject to time-varying factors such as the movement of communication sites, modification of transmitter and receiver attributes, and interference from other concurrent transmissions. With the optional Terrain Modeling module, terrain and atmospheric effects can also affect the performance of radio links.
  • Simulation Features – Wireless domains can reduce simulation time by grouping nodes and sharing the results of pipeline stage calculations among them. The Wireless functionality can capture animations of site movement that can be viewed as a simulation progresses or replayed later.
  • Advanced Features – The Wireless functionality provides a special 14-stage Transceiver Pipeline used by the Simulation Kernel to evaluate the characteristics of wireless communication. The default procedures provided for each stage of the pipeline are useful for a variety of common wireless situations. If necessary, however, Riverbed Modeler users can replace the default stages with user-supplied procedures for special cases. The Wireless functionality provides a variety of built-in functions that Riverbed Modeler users can include in their code to implement wireless communications or use in custom Transceiver Pipeline stages. In addition, they can define custom modulation curves, antenna patterns, and wireless domain models.