Specifying the Resolution of an Antenna Pattern
The resolution of an antenna pattern depends on the total number of gain values used to define it. As described in How Antenna Patterns Are Represented in the Antenna Pattern Editor, the number of gain values depends on the number of polar planes and azimuth values per plane in the antenna pattern model. To change the resolution, therefore, you must change these numbers in the model.
You can change the resolution of an antenna pattern at any time. If the pattern has already been defined, the Antenna Pattern Editor calculates gain values for the new intervals based on the existing gains.
Figure 76: Antenna Pattern with Different Resolutions

To set the resolution of an antenna pattern:
Procedure 34: Setting the Resolution of an Antenna Pattern
Caution— If you change the resolution of an existing pattern, the gain values will be recalculated to match the new polar,azimuth directions. Because of interpolation, some accuracy might be lost. The original gain values cannot be recovered.
-
If necessary, open the antenna pattern in the Antenna Pattern Editor.
-
Modify the following values:
- Polar planes
- Azimuth values per polar plane
