Editing Propagation Model Parameters
Parameters specify the variable information that configures a propagation model. In many models, such as Longley-Rice, the parameters describe the environmental conditions along the signal path. Which parameters a given propagation model supports are defined in the model.
With Terrain Modeling Module, you can create parameter sets to hold frequently used combinations of parameter values, such as:
- open terrain in dry weather
- open terrain in rainy weather
- terrain with heavy vegetation
Having a variety of parameter sets makes it easy for you to run simulations over varying conditions.
Procedure 8: Editing a Parameter Set
-
Choose Topology > Terrain > Edit Parameter Sets (or click the Edit Parameter Sets button in the Manage Propagation Specifications dialog box).
The Edit TMM Propagation Parameter Sets dialog box opens.

-
From the Propagation Model pull-down menu, select the model whose parameters you want to edit.
-
Do one of the following:
- To edit an existing set—From the Parameter Set pull-down menu, select one of the existing sets to edit.
- To create a new set—Click the New Parameter Set button to make a copy of the current set.
-
Change the desired parameters by clicking on each value and typing a new one.
-
When you are finished, click either Save (to use the current name) or Save As (to specify a new name).
Suggested Parameter Values
The following tables list suggested values for the parameters in the Longley-Rice and TIREM propagation models.
Table 2: Suggested Ground Conductivity Values
| Surface Type | Conductivity (Siemens/m) |
|---|---|
| Average Ground | 0.005 |
| Poor Ground | 0.001 |
| Good Ground | 0.020 |
| Fresh Water | 0.010 |
| Sea Water | 5.0 |
Table 3: Suggested Relative Permittivity Values
| Surface Type | Permittivity |
|---|---|
| Average Ground | 15.0 |
| Poor Ground | 4.0 |
| Good Ground | 25.0 |
| Fresh Water | 81.0 |
| Sea Water | 81.0 |
Table 4: Suggested Surface Refractivity Values
| Surface Type | Refractivity¹ |
|---|---|
| Equatorial | 360.0 |
| Continental Subtropical | 320.0 |
| Maritime Subtropical | 320.0 |
| Desert | 370.0 |
| Continental Temperate | 301.0 |
| Maritime Temperate | 320.0 |
| Over Sea | 350.0 |
Note 1: See following note on Longley-Rice Surface Refractivity.
Note on Longley-Rice Surface Refractivity
The Longley-Rice propagation model requires a surface refractivity between 250 and 400. The value you enter for this parameter represents the minimum surface refractivity at sea level and is adjusted internally for elevation. As a result, it might fall outside the allowable range at some elevations. If you receive an error message that the surface refractivity is invalid, use the following equation to determine a parameter value that results in a valid surface refractivity:

where surfaceRefractivityParameter is the value you enter in the propagation model and elevation is given in meters.