Default BER Model (dra_ber)

This section describes the functionality and implementation of the default model occupying stage eleven of the Radio Transceiver Pipeline. This model is named dra_ber. The source code is provided in the file dra_ber.ps.c, which resides in the <reldir>/models/std/wireless directory.

Invocation Context

Bit error rate is typically a function of signal-to-noise ratio (SNR). Thus, bit error rate is evaluated not on a packet by packet basis, but instead in each packet segment, where packet segments are defined by the points at which SNR changes. Bit error rate is evaluated retroactively at the time where a packet segment ends, because it is not usually possible to predict the timing of SNR changes. In addition, bit error rate is measured for the last segment of each packet at the time where it completes reception.

The result of the bit error rate model invocation is a double precision floating point value which represents the expected bit error rate (BER) for the received packet over the previous packet segment. The Simulation Kernel expects this result to be placed in the packet’s OPC_TDA_RA_BER transmission data attribute.

BER Computation

The default model for the BER pipeline stage is called dra_ber. This model evaluates BER based on the previously computed average power SNR and also accounts for processing gain at the receiver. The SNR in dB is obtained from the OPC_TDA_RA_SNR transmission data attribute of the packet. This value is added to the processing gain (also in dB) to obtain an effective SNR. The effective SNR can be converted from log scale and expressed as Eb / N0, where Eb is the received energy per bit (in Joules) and N0 is the noise power spectral density (in watts/hertz). The bit error rate is derived from the effective SNR based on a modulation curve assigned to the receiver. This function, which associates a unique BER with each value of effective SNR, can be specified in the Modulation Curve Editor or via the External Model Access package. Refer to “Modulation Curve Editor” on page 226 or “EMA Support” on page 210 for more information about using these features.

本站文档由 北京智网畅联科技有限公司 整理、翻译并提供 · Documentation compiled and provided by Beijing ZNetLink Technology Co., Ltd.

交流群 · QQ Group:OPNET/智网妙算网络仿真交流群(群号 486383494)

原文档 © 2017 Riverbed Technology · 本站为公益翻译,由 AI 辅助完成,请仔细甄别

Original documentation © 2017 Riverbed Technology. Community translation, AI-assisted. Contact: jiazequn@znetlink.com