Default Channel Match Model (dra_chanmatch)

This section describes the functionality and implementation of the default model occupying stage three of the Radio Transceiver Pipeline. This model is named dra_chanmatch. The source code is provided in dra_chanmatch.ps.c, which resides in the <reldir>/models/std/wireless directory.

Invocation Context

The Radio Transceiver Pipeline determines the compatibility between a radio transmitter channel and a radio receiver channel by invoking the channel match model immediately after completion of the closure model, provided that the latter determined that there was link closure. The simulation time at invocation is the start time for the packet transmission. This model is used to classify transmissions into three categories with respect to the receiver channel of interest. Packets can be considered as valid transmissions which the receiver is capable of processing, interference which cannot be decoded or used by the receiver but which affects other transmissions, or ignored in which case the pipeline sequence is not continued for the packet transmission.

The result of the channel match model for each packet is an integer flag indicating that the packet falls into one of the three categories. The three symbolic constants corresponding to these categories are OPC_TDA_RA_MATCH_VALID, OPC_TDA_RA_MATCH_NOISE, and OPC_TDA_RA_MATCH_IGNORE, respectively. The Simulation Kernel expects this result to be placed in the packet’s OPC_TDA_RA_MATCH_STATUS transmission data attribute.

Compatibility Evaluation

The default pipeline model, dra_chanmatch, considers a transmitter channel and a receiver channel to be compatible only if all of their common channel characteristics match. The characteristics which are analyzed by dra_chanmatch include frequency, bandwidth, data rate, spreading code, and modulation. These are given by the channel attributes min freq, bandwidth, data rate, spreading code, and by the modulation attribute of the transmitter and receiver. If these attributes are identical between the transmitter and the receiver, the packet is considered to be valid.

If the band of transmission has no overlap with the band of the receiver channel, the packet is considered to be an invalid packet which is unable to affect the receiver in any significant manner. These packets are labeled as ignored. For such packets, the remainder of the pipeline stages need not be executed.

If the band of transmission overlaps the band of the receiver channel, but any of the channel attributes do not match, the packet is considered to be interference. Interference packets are modeled only while they might affect the proper reception of valid packets. Thus, certain stages later in the pipeline will not be invoked to process interference packets.

本站文档由 北京智网畅联科技有限公司 整理、翻译并提供 · Documentation compiled and provided by Beijing ZNetLink Technology Co., Ltd.

交流群 · QQ Group:OPNET/智网妙算网络仿真交流群(群号 486383494)

原文档 © 2017 Riverbed Technology · 本站为公益翻译,由 AI 辅助完成,请仔细甄别

Original documentation © 2017 Riverbed Technology. Community translation, AI-assisted. Contact: jiazequn@znetlink.com