Default SNR Model (dra_snr)

This section describes the functionality and implementation of the default model occupying stage ten of the Radio Transceiver Pipeline. This model is named dra_snr. The source code is provided in the file dra_snr.ps.c, which resides in the <reldir>/models/std/wireless directory.

Invocation Context

The computation of SNR depends on the computation of background noise and that of interference noise from other transmissions. While background noise is evaluated only once for each packet transmission (at the time where reception starts), new interference sources can become active or inactive many times during the packet’s reception. Thus, SNR might need to be reevaluated multiple times for a given packet. The portion of the packet which arrives at the receiver between SNR updates is called a packet segment. During any given packet segment, SNR holds a constant value.

The result of the SNR Model invocation for each packet segment is two double precision floating point values which represent the current average power signal to noise ratio for the received packet in decibels (dB), and the time at which the SNR was calculated. The Simulation Kernel expects these results to be placed in the packet’s OPC_TDA_RA_SNR and OPC_TDA_RA_SNR_CALC_TIME transmission data attributes, respectively.

SNR Computation

The SNR computed in this stage is the ratio of the average power of the information signal to the accumulated average power of all background and interference noise sources. These values have been computed by earlier pipeline stages and are therefore available in the transmission data attributes of the packet. The default model, dra_snr, simply computes this ratio by extracting the background and interference noise average power levels from the appropriate transmission data attributes of the packet, and uses the sum of these to divide the received power level of the information signal. The result is returned in dB as required by the Simulation Kernel.

本站文档由 北京智网畅联科技有限公司 整理、翻译并提供 · Documentation compiled and provided by Beijing ZNetLink Technology Co., Ltd.

交流群 · QQ Group:OPNET/智网妙算网络仿真交流群(群号 486383494)

原文档 © 2017 Riverbed Technology · 本站为公益翻译,由 AI 辅助完成,请仔细甄别

Original documentation © 2017 Riverbed Technology. Community translation, AI-assisted. Contact: jiazequn@znetlink.com