Default Background Noise Model (dra_bkgnoise)
This section describes the functions and implementation of the default model that occupies stage nine of the Radio Transceiver Pipeline. This model is named dra_bkgnoise. The source code is provided in dra_bkgnoise.ps.c, which resides in the <reldir>/models/std/wireless directory.
Invocation Context
The background noise model of the pipeline can be used to account for noise sources other than explicitly modeled interferers (i.e., sources which are not other transmitter modules). These sources can be, for example, galactic, thermal, or urban noise, depending on the environment in which the receiver is operating.
The result produced by the background noise model is a double precision floating point value that represents the accumulated power of these noise sources. This value will be factored in to computing the signal to noise ratio (in the SNR pipeline stage) for the recovered signal. The Simulation Kernel expects this result to be placed in the OPC_TDA_RA_BKGNOISE transmission data attribute.
Background Noise Computation
The default procedure provided for the background noise model is dra_bkgnoise, which is a simple model accounting for a constant ambient noise level, a constant source of background noise, and a constant thermal noise at the receiver.
The ambient noise power spectral density can be used to represent sources such as urban noise in the frequency band of interest. In dra_bkgnoise, it is represented as a negligible value given by the symbolic constant AMB_NOISE_LEVEL. This value can be adjusted according to the modeled situation.
Aggregate background noise is characterized by an effective background temperature which is added to the effective device temperature of the receiver. The background temperature is represented by the symbolic constant BKG_TEMP. The noise figure of the receiver is obtained to calculate the effective device temperature, assuming an operating temperature of 290K. The sum of these temperatures, each accounting for a separate source of noise, is multiplied by the bandwidth of the receiver channel and Boltzmann’s constant to obtain the added noise contributed by the receiver to the processed signal. This noise is added to the ambient noise to model the overall effect of inexplicitly modeled noise sources. Note that any receiver amplifier gain that would apply to these noise components is not directly modeled here.