Adding Traffic to the WLAN Network Model

Once your WLAN network topology is built, you can introduce traffic into the model. You can do this through the use of standard applications (such as FTP or E-mail), through raw packet generation, or with traffic demands.

Note: Background traffic is not supported in wireless LAN modeling.

Using Standard Applications

You can configure standard applications, such as FTP and E-mail, to generate traffic in your network model. Application support is included in the WLAN workstation and server nodes. For more information on the configuring standard applications, see “Standard Applications Supported by Application Models” on page 13.

Raw Packet Generation

WLAN station nodes can perform raw packet generation in the network model. To use raw packet generation, configure the Traffic Generation Parameters attribute on WLAN stations, as shown in Figure 669.

Figure 669: Raw Packet Generation

Raw Packet Generation

Using Traffic Demands

There are two ways to configure demands in your Wireless LAN network model.

  • Choose an IP demand from the “demands” object palette
  • Create traffic flows from the Traffic menu

You can find out more about how to introduce traffic demands and flows in your network in Chapter 5 “Modeling Network Traffic” on page 1.

本站文档由 北京智网畅联科技有限公司 整理、翻译并提供 · Documentation compiled and provided by Beijing ZNetLink Technology Co., Ltd.

交流群 · QQ Group:OPNET/智网妙算网络仿真交流群(群号 486383494)

原文档 © 2017 Riverbed Technology · 本站为公益翻译,由 AI 辅助完成,请仔细甄别

Original documentation © 2017 Riverbed Technology. Community translation, AI-assisted. Contact: jiazequn@znetlink.com