Controlling Navigation Speed
When you navigate through the terrain, there are times you want to move quickly, covering large amounts of terrain, and times you want to move slowly, such as when you are moving down a street or within a building. 3D Network Visualizer has the following options for controlling navigation speed:
- Set the navigation speed manually. The observer always moves at the specified speed.
- Use speed scaling to automatically move at different speeds under different circumstances. You can change the rate at which speed is scaled.
In either case, the controls for changing speed are the same. Their effect varies depending on whether or not speed scaling is enabled.
Enabling or Disabling Speed Scaling
When speed scaling is enabled, 3D Network Visualizer makes the following assumptions:
- If the observer is unattached, the higher above the terrain it is, the faster you want to move.
- The closer you are to an attached object, the more slowly you want to move.
Procedure 51: Enabling or Disable Speed Scaling
- Use any of the following methods:
- On the Observer Control Panel (Figure 42), select or clear the Scaled Speed checkbox.
- Choose Observer > Speed Scaling.
- Press the multiply key (
Keypad *). - Click the Speed Scaling icon (
) on the Observer Settings Toolbar.
Changing the Observer's Movement Speed
You can change the observer's linear, rotational, and orbital speed. If speed scaling is enabled, these controls change the speed gain. If speed scaling is disabled, the controls change the absolute speed.
Procedure 52: Changing the Observer's Speed
- Use any of the following methods:
- Adjust a slider on the Observer Control Panel (Figure 42) or on the Observer Settings page on the Display Settings dialog box. The default (center of the slider) is 1. The range is 0.1 to 10.
- Press one of the following keys to change linear speed:
Keypad7(faster) or1(slower).Ctrl+ mouse wheel forward or back.- Movement key + mouse wheel forward or back.
- Press
Keypad+(faster) or-(slower) to change orbital speed.
Note: When you change the observer's speed using the keyboard or mouse, if the Observer Control Panel or the Observer Settings page is open, you can see the scale slider moving to the new setting.