Zooming the Observer
You can zoom the observer.
Zooming the Observer in the 3D Projection
If you want to see something at a higher level of detail without moving the observer, you can zoom the observer view. Zooming the observer narrows the field of view and magnifies objects in the view. The magnification level is saved in saved views. 3D zoom has the following characteristics:
- When you zoom the observer view, its movement and mouse look speeds are decreased as the magnification increases, to allow for increased control.
- If you zoom in from a very high altitude there may be scene corruption due to insufficient precision in the z-buffer. This can be limited by moving the observer closer to the subject before zooming in. This issue is typically only encountered above 10,000 meters.
- When you zoom, 3D Network Visualizer respects the environmental conditions at the observer's location. For example, if the observer is above the cloud layer, zooming does not let you see below the clouds. Or, if it is raining at the observer's location, the visibility will not improve as you zoom in on a distant object.
- After zooming in, when you zoom out, you can only zoom out to the 0 magnification level. That is, you can only zoom out back to the observer's location. If you want to see more of the terrain, you must move the observer to a greater distance from the terrain.
- Some terrains are not designed to be viewed at higher magnification. Performance may decrease if magnification increases the level of detail of large areas of the terrain. For example, suppose you are looking down a line of trees that is in the center of the view. At the normal magnification level there are a certain number of trees at each quality level, say 10 high, 20 medium, and 100 low (for a total of 130 trees). Suppose also that performance will be acceptable only when visualizing 15 or fewer high quality trees. If you magnify the scene 2x, you may now see 20 high, 40 medium, and 70 low quality trees. You see the same numbers of trees, but the performance will decrease because you are visualizing more high quality models.
To zoom in, press the = key, press Ctrl and scroll the mouse wheel forward, or on the Observer Control Panel specify a value in the Magnification box.
To zoom out, press the - (dash) key, press Ctrl and scroll the mouse wheel backward, or on the Observer Control Panel specify a value in the Magnification box.
Note: Each press of the
=or-key or increment of the mouse wheel increases or decreases magnification by a factor of 1.25.
To reset magnification to 1.0, press zero (0) or press the middle mouse button.