Configuring IPv6

IPv6 Migration Planner (IPv6 Planning and Operations Feature)

The IPv6 Migration Planner can be used to configure IPv6 network models. To use this feature, you need IPv6 Planning and Operations.

Configuring IPv6 Addresses

All IP nodes in the model library are dual-stack capable, which means that they can support both IPv4 and IPv6. In addition to IPv4 addresses, you can configure IPv6 link-local and global addresses on interfaces. You can do this manually or by using the utilities provided in the software, as described in the following procedure.

Procedure 61: Configuring IPv6 Addresses (Automatically)

  1. (Optional) Select the links or nodes (for Option 1, below) or select the nodes (for Option 2, below) on which you want to assign IPv6 addresses.

  2. Use one of the following options to assign IPv6 addresses:

    • Option 1—Assign IPv6 addresses to physical and loopback interfaces.

      Choose Protocols > IP > IPv6 > Auto-Assign IPv6 Addresses.

      If you have selected links in step 1, IPv6 addresses are assigned to the interfaces on either side of the links you selected. If you selected nodes in step 1, IPv6 addresses are assigned to all physical and loopback interfaces on the nodes you selected. If you selected nothing in step 1, IPv6 addresses are assigned to all physical and loopback interfaces in the network that do not have an IPv6 address.

    • Option 2—Assign IPv6 addresses to sub-interfaces on selected nodes.

      Choose Protocols > IP > IPv6 > Assign IPv6 Addresses to Sub-interfaces on Selected Nodes.

End of Procedure 61

Procedure 62: Configuring IPv6 Addresses (Manually)

  1. Right-click on the node and select Edit Attributes.

  2. Configure the node based on the type of node selected:

    2.1 Gateway node—Go to the IP > IPv6 Parameters > Interface Information attribute.

    - Add a row to the IP > IPv6 Parameters > Interface Information attribute table.
    
    - In the Name column of the row you just created, select the name of the interface you want to configure from the pull-down menu. Make sure that the name specified here is the same as the name defined for this interface in the IP > IP Routing Parameters > Interface Information > Name attribute.
    
    - Configure the following attributes:
    
      **Link-Local Address**—If this attribute is set to Default EUI-64, the model automatically assigns a unique link-local address during the simulation.
    
      **Global Address(es)**—Assign a global address by adding a row to the Global Address(es) table. If you set the Address Type attribute to EUI-64, you only need to specify the first 64 bits of the address. The remaining 64 bits of the address will be set to an interface ID unique to the interface.
    
      For nodes which are using DHCP, you can specify the option "From DHCP" or "From DHCP prefix delegation" to obtain either an address or prefix assignment for this interface, respectively.
    

    2.2 Host node—Go to the IP > IP Host Parameters > Interface Information > IPv6 Parameters attribute.

    - **Link-Local Address**—If this attribute is set to Default EUI-64, the model automatically assigns a unique link-local address during the simulation.
    
      > **Note:** Setting the Link-Local Address attribute of an interface to “Default EUI-64” enables IPv6 on that interface.
    
    - (optional) **Global Address(es)**—If you do not specify a global address, the model uses stateless address auto-configuration to determine the address of the host node. This only works if the host node is connected to a router. The host node uses the router advertisements from the router to compute its own address.
    
  3. Click OK in the open Attribute dialog boxes to save your changes.

End of Procedure 62

本站文档由 北京智网畅联科技有限公司 整理、翻译并提供 · Documentation compiled and provided by Beijing ZNetLink Technology Co., Ltd.

交流群 · QQ Group:OPNET/智网妙算网络仿真交流群(群号 486383494)

原文档 © 2017 Riverbed Technology · 本站为公益翻译,由 AI 辅助完成,请仔细甄别

Original documentation © 2017 Riverbed Technology. Community translation, AI-assisted. Contact: jiazequn@znetlink.com