Robust Header Compression (RoHC)
Robust Header Compression (RoHC) can be configured on a per-SA basis on both manual and dynamic SAs. RoHC is a mechanism that provides bandwidth savings over the ciphertext (CT) network by compressing packets between HAIPE devices as they are encrypted. Maximum compression can be achieved for RTP-based applications when the RTP/UDP/IP profile is enabled as a typical plaintext (PT) packet can have its RTP, UDP, and IP headers replaced with a single RoHC header prior to encryption on the sending HAIPE; the receiving HAIPE will then restore the full PT packet as it is decrypting it.
Manual SA configuration is performed under the Manual Security Association Database attribute, and dynamic SA configuration is performed under the FFSA Table attribute. The RoHC attributes are detailed in the following table.
Table 86: RoHC Attributes
| Attribute | Description |
|---|---|
| RoHC Status | Specifies whether RoHC will be enabled for this SA. |
| RoHC Profiles | The available RoHC profiles can be enabled or disabled individually: RTP/UDP/IP, UDP/IP, and IP. For a given packet, the supported profile offering the best compression will be used. |
| RoHC - SPI of SA for Feedback | Configured for manual SAs only. On an outbound SA, select an inbound SA for which RoHC feedback will be sent to the peer HAIPE. Dynamic SAs will automatically configure feedback as they are created in pairs. |
| RoHC Maximum Contexts | Specifies the maximum number of contexts the HAIPE will maintain simultaneously for the SA. |
| RoHC Initialization and Refresh Timeout | Specifies the timeout duration a HAIPE will wait during RoHC initialization and before refreshing a given RoHC context. |