Indications and Events
The TCP processor model can create a number of indications/events.
The events will have one of the following ICI formats:
tcp_status_indtcp_open_ind_inet(if inet_support true)tcp_open_ind(if inet_support not true)
The tcp_status_ind ICI is created each time it is sent, so it should be destroyed after being processed.
The tcp_status_ind ICI is sent when:
- A group of packets are sent to the application as a result of a call to
tcp_receive_command_send (). The status isTCPC_IND_SEG_FWD - Receipt of
RSTinSYN-SENTstate (with statusTCPC_IND_ABORTED) - Entry into
ESTABLISHEDstate (with statusTCPC_IND_ESTAB) - Entry into
TIME-WAITstate (with statusTCPC_IND_CLOSEDorTCP_IND_ABORTED) - Entry into CLOSE-WAIT state (with status
TCPC_IND_FIN_RECEIVED) - Connection is aborted (with status
TCP_IND_ABORTED)
The following are values defined in tcp_api.h. Some are used for "status" in the "tcp_status_ind" ICI.
TCPC_INT_CONNECT_REQUEST is used as the interrupt code when the interrupt type is OPC_INTRPT_REMOTE.
TPAL only recognizes ESTAB, FIN_RECEIVED, CLOSED and ABORTED. "tcp_status_ind" accompanies a data packet, with status SEG_FWD.
The following table shows the status values contained in tcp_api.h.
Table 219: TCP Status Indication Values
| Name | Value | Description |
|---|---|---|
TCPC_IND_NONE |
0 | |
TCPC_IND_SEG_FWD |
1 | Sent with op_pk_send() |
TCPC_IND_ESTAB |
2 | Sent as indication, when TCP enters into state ESTABNote: This happens for an active open when the SYN/ACK is received and an ACK is sent. This happens for a passive open when the ack for a SYN/ACK is received. |
TCPC_IND_CLOSED |
3 | Sent as indication |
TCPC_IND_ABORTED |
4 | Sent as indication. Also returned if an active open times out. |
TCPC_IND_CONNECT_REQUEST |
5 | Sent as interrupt code used to transmit a "tcp_open_ind" or "tcp_open_ind_inet" ICI**Note—**The application can set "accept status" to TCPC_IND_CONNXN_REJECT to reject the connection. If this is selected, the SYN is simply ignored. Any other value, including 0, 1 (the default) and TCPC_IND_CONNXN_ACCEPT, will accept the connection. |
TCPC_IND_CONNXN_REJECT |
6 | Set as accept status |
TCPC_IND_CONNXN_ACCEPT |
7 | Set as accept status |
TCPC_IND_CONNECT |
8 | Sent as indication Note: This indication is used only in tpal_intf_tcp_v3.pr.c, where it is the same value as TPALC_EV_MASK_FIN_RECEIVE. |
TCPC_IND_FIN_RECEIVED |
9 | Sent as indication |
For more information in this section, see: