Example Connection Sequence
The example in the table that follows shows the TCP API functions and messages for a typical connection sequence between the Application Layer and the TCP Interface.
For more information about all the main TCP API functions, see TCP API Functions.
| Sequence | Originating Host | Description |
|---|---|---|
tcp_app_register() |
Local | Registers Application Layer to accomplish all subsequent interaction with TCP Interface |
tcp_connection_open() |
Local | Opens a TCP connection between local and remote hosts |
TCPC_IND_CONNECT_REQUEST |
Remote | Interrupt received if passive open selected |
TCPC_IND_ESTAB |
Remote | Indication received for established connection (or TCPC_IND_ABORTED if the open fails) |
tcp_receive_command_send() |
Local | Indicates that the application is ready to receive one or more packets from remote host |
tcp_data_send() or tcp_data_send_with_options() |
Local | Functions used to send data |
TCPC_IND_CONNECT_REQUEST |
Remote | Indication status that application packets will be sent via interrupt data stream |
tcp_receive_command_send() |
Local | Allows more packets to be received |
tcp_connection_close() |
Local | Closes the connection |
TCPC_IND_FIN_RECEIVED |
Remote | Received after peer has called tcp_connection_close() and all packets have been received |
TCPC_IND_CLOSED |
Remote | Received when both sides have sent tcp_connection_close() |
tcp_app_handle_destroy() |
Local | Unregisters the Application Layer with the TCP Interface |
Note: TCP_IND_ABORTED may be received at any point after tcp_connection_open() has been called.
For information about communication between the TCP Interface to the Application Layer, see Events from the TCP Interface to the Application Layer.
For more information in this section, see: