DPT Menu

The following operations are available from the Protocols > DPT menu.

Table 212: DPT Menu Operations

Menu Item Description Reference
Create DPT Ring Creates a new Cisco DPT ring in the Project Editor workspace. Creating a DPT Ring
Model User Guide Opens this document. —

An example project (called DPT) is shipped with the standard model library. It highlights several features of the SRP model, including IPS in failure recovery studies as well as spatial reuse and the fairness algorithm, which is discussed below.

Figure 540: fairness_algorithm Scenario of DPT Example Project

fairness_algorithm Scenario of DPT Example Project

The results confirm that fairness algorithm implementation ensures that bandwidth is equally shared among site_B, site_C, and site_D, given that they are all trying to send the same amount of traffic to site_E. Figure 541 shows the results for two cases, where each node generates a total load of 600 Mbps.

  • site_B, site_C, and site_D generate 1500 byte packets at a rate of 49,998 packets/sec (total load of 600Mbps from each node)

Figure 541: SRP Data Traffic Sourced

SRP Data Traffic Sourced

From the graphs, note that from 3 to 4 seconds, each node sources approximately 210 Mbps of data.