Model Features
This section provides a list of the main features available in the Spatial Reuse Protocol model:
- The SRP model suite implements SRP Version 2.0.
- The SRP model suite captures the following protocol behavior:
Table 209: SRP Model Features
| Feature | Description |
|---|---|
| SRP header information | SRP data and control packet header information is configurable. The model assumes that header bits are transmitted without errors and so the header’s parity bit is not modeled. |
| Topology discovery | Topology discovery, which plays a key role in SRP ring selection, is explicitly modeled. A simulation attribute allows you to turn off topology discovery at a specified simulation time to reduce simulation duration. |
| SRP Fairness algorithm (SRP-fa) | SRP fairness algorithm is modeled. This algorithm ensures that each node on the ring has a fair share of the ring bandwidth by controlling the rates at which packets are forwarded or sourced onto the ring by the node. Fairness algorithm parameters (specifically, my_usage, fwd_rates, allow_usage, and max_usage) are configurable using model attributes. |
| Dynamic ring selection | Ring selection is done using ARP (Address Resolution Protocol). The source node sends ARP request packets on the outer and inner rings. The responding node then consults the topology map and selects the ring with the shorter hop count for data transmission. The ARP response is then sent on the other ring (the one with the higher hop count). The model also enables you to disable dynamic ring selection for a node and manually select a particular ring for data transmission. |
| Packet prioritization | SRP’s packet prioritization and expedited priority packet handling for the transmit queue and transmit buffer are modeled. This feature allows SRP to support real-time applications (such as voice and video over IP), mission critical applications, and control traffic, which have stricter delay bounds and jitter constraints. |
| Intelligent Protection Switching (IPS) | The model supports SRP’s Intelligent Protection Switching (IPS) feature. This feature allows SRP rings to automatically recover from fiber facility or node failure by wrapping the traffic on the failed span. |
- SRP models are implemented based on information available from the following sources.
Table 210: Reference Documents
| Document | Title |
|---|---|
| Cisco Public Documentation | Dynamic Packet Transport Technology and Applications Overview |
| Cisco Public Documentation | Spatial Reuse Protocol Technology |
Note that the SRP model is intended for use in discrete event simulations—Flow Analysis does not support SRP at this time.