Node Models

The SRP node models are accessible on the DPT object palette.

Figure 530: DPT Object Palette

DPT Object Palette

The SRP model suite contains the following node and link models:

Table 211: Node and Link Models in the SRP Model Suite

Type Model
Router nodes • atm_ethernet4_slip4_srp
• ethernet4_slip4_srp_router
• srp_ethernet_router
Traffic generator nodes • srp_station
• srp_tos_station
Link • DPT-OC12
• DPT-OC48
• DPT-SONET-OC12
• DPT-SONET-OC48

srp_station. The srp_station node model represents a traffic source/sink that generates and receives traffic for DPT rings running SRP as the media access control protocol. All the nodes in the DPT ring should be of the same type (srp_station in this case) and these nodes cannot be directly connected to any external sources (such as LANs). LANs can only be connected to DPT rings through routers.

srp_tos_station. This srp_tos_station node model offers the same functionality as the srp_station node except that it also supports priority handling according to the type of traffic.

Note: If the standard router node models do not suit your modeling requirements, you can use the Device Creator to create the router models you need. The SRP device type is the Cisco GSR/120xx, which is one of the Cisco Vendor Devices. The Device Creator is described in more detail in the product documentation.