Switch Port Configuration Attribute

The Switch Port Configuration compound attribute specifies the configuration for each port in the selected node. For example, attributes such as port speed, duplex mode, and priority, as well as QoS and VLAN parameters, are specified in this table. Note that switch ports can only support VLANs that are supported by the node. Therefore, the switch VLAN configuration (VLAN Parameters > Supported VLANs), described above, must be done before configuring the ports for VLAN.

Ports are defined as Trunk, Access, or Hybrid. Open the Switch Attribute dialog box to access the Switch Port Configuration attribute. The related attribute tables are shown in Figure 627.

Figure 627: Switch Port Configuration Attribute

Switch Port Configuration attribute

Operational Switch Port Type

The port type of a switch port is inferred by the simulation engines from the setting of the Tagging attribute and is not determined from the Port Type attribute. If all rows in the Supported VLANs table are set to Send Untagged, the port is inferred to be an access port. As such, packets exiting the port are always untagged. Packets entering an access port are tagged with the value set in the PVID attribute. If the PVID attribute is not configured, the packets are tagged with the VLAN ID from the first row of the Supported VLANs table.

If all rows of the Supported VLANs table have the Tagging attribute set to Send Tagged, the port is inferred to be a trunk port. Packets exiting a trunk port are always tagged, and the trunk port expects to receive only tagged packets and will drop incoming untagged packets. PVID is not relevant to trunk ports.

If the rows in the Supported VLANs table have a mixture of Send Tagged and Send Untagged values in the Tagging attribute, the port is inferred to be a hybrid port. Packets are sent and received on a hybrid port with or without VLAN tags based on their respective VLAN tagging configuration. Untagged packets use the VLAN ID from the first row of the Supported VLANs table that has the Tagging attribute set to Send Untagged.