网络对象属性说明
altitude modeling
该属性决定仿真内核如何解释对象的 altitude 属性。共有三种可能的设置
- relative to subnet——海拔设置被解释为对象在当前子网上方的海拔高度。
- absolute——海拔设置是对象相对于全球海平面的海拔高度。
- relative to terrain——海拔设置是对象相对于下方地形(山脉、山谷、海洋等)的海拔高度。
仅当使用 Wireless 模块时,该属性才会出现。
| Editing | Simulation | |
|---|---|---|
| Data Type | enumerated | enumerated |
| Access | read/write/promote | read |
| Default Value | relative to subnet | |
| Units | ||
| Constraints | see description |
Application Configuration
该属性为该客户端上要支持的不同应用设置流量特性。
| Editing | Simulation | |
|---|---|---|
| Data Type | compound | compound |
| Access | read/write | read/write |
| Default Value | Off | |
| Units | ||
| Constraints |
arrowheads
该属性指定对象在 Project Editor 中显示时,其端点是否出现箭头。
| Editing | Simulation | |
|---|---|---|
| Data Type | enumerated | string |
| Access | read/write | read |
| Default Values | simplex point-to-point link: “tail” duplex point-to-point link: “head and tail” bus tap: “head and tail” path: “head and tail” demand: “tail” |
|
| Units | ||
| Constraints | head and tail, head, tail, none |
attribute promotion
该属性允许你控制提升属性的显示。启用时,子网内对象提升后的属性会出现在子网的属性列表中。禁用时,这些属性不会出现在列表中,也不会继续提升到子网的父级。
当模型包含多层嵌套子网、每层又有许多节点和许多提升属性时,该属性最为有用。在这种情况下,显示任何子网(尤其是顶层子网)的 Attributes 对话框,或滚动浏览属性列表,都可能缓慢而繁琐。建议将 “attribute promotion” 设置为 disabled,除非你需要在子网上显示或修改某个提升属性的值。
尽管当该属性值为 “disabled” 时,提升属性不会出现在子网属性列表中,但它们在仿真运行时仍必须被解析。
| Editing | Simulation | |
|---|---|---|
| Data Type | toggle | not applicable |
| Access | read/write | not applicable |
| Default Value | disabled | |
| Units | ||
| Constraints |
ber
该属性可用于指定通过链路传输的数据包中发生比特错误的概率。通常,ber 由链路管道的错误模型转换为实际的比特错误。例如,ber 为 0.1 时,长度为 100 比特的数据包平均会有 10 个比特错误。
如果该属性设置为 NONE,则跳过该管道阶段,仿真内核将使用默认值,如“Pipeline Stage Definition”第 356 页所述。
有关收发器管道的详细信息,参见第 9 章“Communication Mechanisms”第 331 页。
| Editing | Simulation | |
|---|---|---|
| Data Type | double | double |
| Access | read/write/promote | read/write |
| Default Value | 0.0 | |
| Units | errors/bit | |
| Constraints | 0.0 <= ber <= 1.0 |
bundle display
该属性为指定链路设置链路捆绑选项。当 “network_visualization.auto_link_bundling” 偏好设置处于激活状态时,可以设置 “bundle display” 属性以覆盖该偏好设置。
“bundle display” 属性的设置如下
- include in bundle and display fanned out——指定将该链路包含在捆绑中。此外,默认情况下在展开的捆绑中显示该链路。
- include in bundle and display collapsed——指定将该链路包含在捆绑中。此外,默认情况下在折叠的捆绑中显示该链路。
- exclude from bundle——指定将该链路从任何捆绑中排除。
| Editing | Simulation | |
|---|---|---|
| Data Type | enumerated | not applicable |
| Access | read/write | not applicable |
| Default Value | include in bundle and display collapsed | |
| Units | ||
| Constraints | include in bundle and displayed fanned out, include in bundle and display collapsed, exclude from bundle. |
channel count
该属性指定链路中的信道数量。为保持链路一致性,该数量必须与挂接到该链路的节点的发送机和接收机所支持的信道数量相同。
| Editing | Simulation | |
|---|---|---|
| Data Type | integer | integer |
| Access | read/write | read |
| Default Value | 1 | |
| Units | ||
| Constraints | >= 1 |
有关链路一致性的更多信息,参见第 7 章“Network Domain”第 292 页。
closure model
该属性指定一个已编译的管道过程的名称,该过程能够确定总线上任意发送机与接收机之间的连通性。该阶段的目的是允许用户对哪些发送机-接收机对可以通信施加限制。该管道阶段的默认指定是基础模型 dbu_closure,它允许所有发送机与接收机之间建立连通。
如果该属性设置为 NONE,则跳过该管道阶段,仿真内核将使用默认值,如“Pipeline Stage Definition”第 356 页所述。
| Editing | Simulation | |
|---|---|---|
| Data Type | typed file | string |
| Access | read/write | read |
| Default Values | dbu_closure |
|
| Units | ||
| Constraints |
有关 dbu_closure 的更多信息,参见第 3 章“Pipeline Stages/Bus Link”第 6 页。
coll model
该属性指定一个已编译的管道过程的名称,当两个数据包同时出现在总线链路的同一接收机信道上时,调用该过程以登记发生了碰撞。数据包经历的碰撞次数通常记录在数据包传输数据中。通常,这些信息随后由 “error correction” 管道阶段用于决定在接收机信道处接受还是拒绝该数据包。该管道阶段的默认指定是基础模型 dbu_coll,它认为在总线接收机信道上时间重叠的任何数据包都发生了碰撞。
如果该属性设置为 NONE,则跳过该管道阶段,仿真内核将使用默认值,如“Pipeline Stage Definition”第 356 页所述。
有关 dbu_coll 的详细说明,参见第 3 章“Pipeline Stages/Bus Link”第 6 页。
| Editing | Simulation | |
|---|---|---|
| Data Type | typed file | string |
| Access | read/write | read |
| Default Value | dbu_coll | |
| Units | ||
| Constraints |
color
该属性指定对象实例在 Project Editor 中显示时的颜色。该属性对仿真没有影响。单击该属性的 Value 列会打开 Color Chooser。
“color” 的取值范围为 RGB000 到 RGB333,其中每一位都是 0 到 3(含)之间的整数。第一位越大,红色越多;第二位越大,绿色越多;第三位越大,蓝色越多。因此,RGB000 对应黑色,RGB333 对应白色,RGB300 对应红色,依此类推。
| Editing | Simulation | |
|---|---|---|
| Data Type | color | not applicable |
| Access | read/write | not applicable |
| Default Values | point-to-point link: RGB000 bus link: RGB023 bus tap: RGB222 path: RGB003 demand: RGB010 |
|
| Units | ||
| Constraints |
condition
该属性表示对象的运行状态。值为 “enabled” 表示对象处于活动状态,可以执行该对象类型的所有通常功能。值为 “disabled” 表示对象无法执行任何功能。例如,被禁用的链路不能转发数据包,尝试的传输将被丢弃。
希望研究节点被禁用所产生影响的用户,可以在仿真过程中使用内核过程 op_ima_obj_attr_set() 修改 “condition” 属性。将值从 “enabled” 改为 “disabled” 会在所选模块处产生故障中断。将值从 “disabled” 改为 “enabled” 会在所选模块处产生恢复中断。
| Editing | Simulation | |
|---|---|---|
| Data Type | toggle | toggle |
| Access | read/write/promote | read/write |
| Default Value | enabled | |
| Units | ||
| Constraints | enabled, disabled |
有关建模故障与恢复的更多信息,参见“Modeling Node and Link Failure/Recovery”第 313 页。
cost
该属性是一个双精度浮点数,主要用作路由参数。该参数通常由确定路由总成本的路由 API 使用。用户在开发新的路由算法时,也可以显式地使用这一数值。
| Editing | Simulation | |
|---|---|---|
| Data Type | double | double |
| Access | read/write/promote | read/write |
| Default Value | 0.0 | |
| Units | ||
| Constraints | cost >= 0.0 |
creation data
该属性指定关于对象创建的附加信息。
| Editing | Simulation | |
|---|---|---|
| Data Type | string | not applicable |
| Access | read/write | not applicable |
| Default Value | “” | |
| Units | ||
| Constraints |
creation source
该属性指定对象是如何创建的。
| Editing | Simulation | |
|---|---|---|
| Data Type | string | not applicable |
| Access | read/write | not applicable |
| Default Value | “Object Palette” | |
| Units | ||
| Constraints |
creation timestamp
该属性指定对象创建的时间。
| Editing | Simulation | |
|---|---|---|
| Data Type | date | not applicable |
| Access | read/write | not applicable |
| Default Value | ||
| Units | ||
| Constraints |
data rate
该属性指定通过链路进行数据传输的速率。该速率仅适用于链路支持的第一个信道,并且必须与挂接节点中发送机和接收机的信道 [0] 的数据速率相匹配。特殊值 “unspecified” 允许链路在仿真运行时从挂接节点中的发送机和接收机信道获取其数据速率。
| Editing | Simulation | |
|---|---|---|
| Data Type | double | double |
| Access | read/write/promote | read/write |
| Default Value | 1024.0 | |
| Units | bits/second | |
| Constraints | data rate > 0.0 |
delay
对于点对点链路,该属性通常指定数据包通过该链路时将经历的绝对传播时延(以秒计)。该数值由管道的传播时延阶段使用。通常,赋给 “delay” 的数值是整个链路的总传播时延;如果认为传播时延的影响可以忽略,则赋值为零。如果该属性具有符号值 “Distance Based”,则传播时延根据源到目的地的距离和传播速度确定。
对于总线链路,该属性是一个正的双精度浮点数,通常用于计算通过总线发送的数据包将产生的传播时延。该数值以“秒每米”为单位给出,表示信号在总线内传播一米距离所需的仿真时间。该数值用于总线管道的传播时延(propdel)阶段。距离沿用户指定的总线链路路径测量,而不是在通信收发器之间进行简单的距离计算。默认值 0.0 意味着所有挂接到总线的接收机在同一仿真时间接收传输。
| Editing | Simulation | |
|---|---|---|
| Data Type | double | double |
| Access | read/write/promote | read/write |
| Default Value | 0.0 | |
| Units | point-to-point link: seconds bus link: seconds/meter |
|
| Constraints | delay >= 0.0 |
ecc model
该属性指定一个已编译的管道过程的名称,该过程决定通过链路传输的数据包能否被目的节点中的接收机接受。管道过程可以使用任何应用特定的准则来决定接受还是拒绝数据包。但一般而言,这一决定基于数据包中错误比特的数量。
- 对于点对点链路,默认模型只是将存在的比特错误比例与接收机的 ecc threshold 属性的值进行比较。如果错误数量超过阈值,数据包将被拒绝。
- 对于总线链路,默认模型首先检查数据包是否经历了碰撞。如果经历了碰撞,数据包将被接收机信道拒绝。如果数据包没有经历任何碰撞,默认模型接着检查数据包中的比特错误数量。如果数据包中的错误数量超过总线接收机的 ecc threshold 属性的值,则拒绝该数据包。如果数据包没有经历碰撞且错误数量少于 ecc threshold,则被接收机接受。
如果该属性设置为 NONE,则跳过该管道阶段,仿真内核将使用默认值,如“Pipeline Stage Definition”第 356 页所述。
有关收发器管道的信息,参见第 9 章“Communication Mechanisms”第 331 页。
| Editing | Simulation | |
|---|---|---|
| Data Type | typed file | string |
| Access | read/write | read |
| Default Value | point-to-point link: dpt_ecc bus link: dbu_ecc |
|
| Units | ||
| Constraints |
error model
该属性指定一个已编译的管道过程的名称,该过程计算通过链路传输的给定数据包中的比特错误数量。比特错误数量必须是大于或等于零且小于或等于数据包所含比特数的整数。默认模型基于 ber 属性的值和数据包的长度,计算数据包的比特错误总数。
如果该属性设置为 NONE,则跳过该管道阶段,仿真内核将使用默认值,如“Pipeline Stage Definition”第 356 页所述。
有关收发器管道的更多信息,参见第 9 章“Communication Mechanisms”第 331 页。
| Editing | Simulation | |
|---|---|---|
| Data Type | typed file | string |
| Access | read/write | read |
| Default Value | point-to-point link: dpt_error bus link: dbu_error |
|
| Units | ||
| Constraints |
financial cost
该属性指定购买或维护该对象的成本。
| Editing | Simulation | |
|---|---|---|
| Data Type | string | string |
| Access | read/write/promote | read/write |
| Default Value | “0.00” | |
| Units | ||
| Constraints |
hostname
| Editing | Simulation | |
|---|---|---|
| Data Type | string | not applicable |
| Access | read/write/promote | not applicable |
| Default Value | “” | |
| Units | ||
| Constraints |
icon name
该属性指定在网络图中表示该对象所使用的位图。图标可以使用 Icon Editor 创建。该属性的取值对仿真行为没有影响。
| Editing | Simulation | |
|---|---|---|
| Data Type | icon | not applicable |
| Access | read/write | not applicable |
| Default Values | subnetwork: subnet fixed communications node: fixed_comm |
|
| Units | ||
| Constraints |
IP Address Information
允许配置以下内容:
- IP 接口数量
- 每个接口的 IP 地址
- 每个接口的子网掩码
- 每个 IP 接口的 MTU
取值 No IP Interfaces 表示尚未设置任何 IP 接口。
| Editing | Simulation | |
|---|---|---|
| Data Type | compound | compound |
| Access | read/write | read/write |
| Default Value | No IP Interface | |
| Units | ||
| Constraints |
IP Forwarding Rate
中央处理器在一秒内处理的数据包数量。槽位处理器的服务速率在 IP Slot Information 属性中指定。
| Editing | Simulation | |
|---|---|---|
| Data Type | double | double |
| Access | read/write | read/write |
| Default Value | 5000.0 | |
| Units | packets/second | |
| Constraints |
IP Processing Scheme
控制 IP 用于数据包转发的服务器(处理器)数量和队列数量。在中央处理方式中,使用一个服务器和一个队列处理所有数据包。在基于槽位的处理方式中,除一个中央服务器(及其自己的队列)外,还使用额外的服务器(每个都有自己的队列)来处理数据包。额外服务器的数量由已配置的槽位数量决定。IP Slot Information 模型属性控制 IP 进程实例使用的槽位数量。与多个服务器配合使用时,基于槽位的处理方式可以提供更高的数据包吞吐量。
| Editing | Simulation | |
|---|---|---|
| Data Type | integer | integer |
| Access | read/write | read/write |
| Default Value | Central Processing | |
| Units | ||
| Constraints |
IP Slot Information
通常,IP 路由设备具有槽位,每个槽位都有自己的槽位处理器。该属性允许与 IP 模型一起对这类带槽位的设备进行建模。仅当 Router Processing Scheme 属性设置为 Slot Based Processing 时,该属性中的信息才会被使用。取值 NOT USED 表示零个槽位。
| Editing | Simulation | |
|---|---|---|
| Data Type | compound | compound |
| Access | read/write | read/write |
| Default Value | ||
| Units | ||
| Constraints |
label color
指定相应节点的标签颜色。你可以为每个节点(和子网)设置该属性,以与背景形成对比。默认颜色为 black。
| Editing | Simulation | |
|---|---|---|
| Data Type | color | not applicable |
| Access | read/write | not applicable |
| Default Value | black | |
| Units | ||
| Constraints |
label rotation
指定链路标签的旋转方式。默认情况下,链路标签水平显示。不过,你可以使用链路属性 “label rotation” 旋转标签。该属性可以设置为 horizontal、vertical、parallel to link 或 perpendicular to link。
| Editing | Simulation | |
|---|---|---|
| Data Type | enumerated | not applicable |
| Access | read/write | not applicable |
| Default Value | horizontal | |
| Units | ||
| Constraints |
LAN Background Utilization
为在该对象上创建基线负载提供一种方法。这种负载称为背景利用率,以数据速率的百分比指定。可以为不同的仿真持续时间指定不同的值。该属性指定的流量不包括导入的流量,也不包括由网络源显式生成的流量。背景利用率流量在计算统计量时计入总流量负载。
| Editing | Simulation | |
|---|---|---|
| Data Type | compound | compound |
| Access | read/write | read/write |
| Default Value | ||
| Units | ||
| Constraints |
LAN MAC Address
表示该 LAN 的 Ethernet MAC 的地址。
| Editing | Simulation | |
|---|---|---|
| Data Type | integer | integer |
| Access | read/write | read/write |
| Default Value | auto-assigned | |
| Units | ||
| Constraints |
LAN Server Name
驻留在该 LAN 中的服务器的名称。其他 LAN 的客户端可以通过将该名称指定为其 Server Name 来与该 LAN 中的服务器通信。
| Editing | Simulation | |
|---|---|---|
| Data Type | string | string |
| Access | read/write | read/write |
| Default Value | auto-assigned | |
| Units | ||
| Constraints |
LAN Type
Ethernet LAN 的类型。有效的 LAN 类型如下:
- Ethernet: 10BaseT
- Fast Ethernet: 100BaseT
- Gigabit Ethernet: 1000BaseX
- FDDI: 100Mbps
- Token Ring 4: 4Mbps
- Token Ring 16: 16Mpbs
| Editing | Simulation | |
|---|---|---|
| Data Type | integer | integer |
| Access | read/write | read/write |
| Default Value | Ethernet | |
| Units | ||
| Constraints |
line style
该属性允许你修改在网络图中表示该链路的线型。它对仿真行为没有影响。
注意: 你只能在链路对象的各个实例上设置 “line style” 属性。它不会出现在链路模型接口中,因此无法在模型范围内为链路对象设置该属性。
| Editing | Simulation | |
|---|---|---|
| Data Type | enumerated | not applicable |
| Access | read/write | not applicable |
| Default Values | link: solid path: solid demand: dotted |
|
| Units | ||
| Constraints | solid, dashed, dotted |
map
该属性指定一个带有 “.cds” 后缀(属性值中不包含该后缀)的制图数据集文件的名称,其内容显示在 Project Editor 中。
该属性对仿真没有影响。
| Editing | Simulation | |
|---|---|---|
| Data Type | typed file | not applicable |
| Access | read/write | not applicable |
| Default Value | ||
| Units | ||
| Constraints |
minimized icon
该属性指定当缩放导致子网太小而无法用其原始图标表示时,子网将如何显示。
| Editing | Simulation | |
|---|---|---|
| Data Type | minimized icon | not applicable |
| Access | read/write | not applicable |
| Default Value | subnetwork: “circle/#FF0000” communication node: “circle/#708090” |
|
| Units | ||
| Constraints |
model
该属性指定该对象所基于的模型。模型的主要作用是规定对象的属性如何配置。模型表示对象的内部结构,因而也决定对象的能力,并且可以使对象继承已向上提升的属性。
要了解有关节点模型的更多信息,参见第 6 章“Node Domain”第 263 页。要了解有关链路模型的更多信息,参见第 9 章“Communication Mechanisms”第 331 页。
| Editing | Simulation | |
|---|---|---|
| Data Type | enumerated | string |
| Access | read/write | read |
| Default Value | ||
| Units | ||
| Constraints | valid model name |
name
该属性指定用于标识目的的字符串。它有助于在模型报告中识别链路。它在仿真过程中也用于通过内核过程 op_id_from_name() 获取链路对象 ID。对象 ID 有助于获取属性值,也可用于路由或动态地禁用/启用链路。Riverbed 仿真内核本身不使用该属性。
| Editing | Simulation | |
|---|---|---|
| Data Type | string | string |
| Access | read/write | read |
| Default Values | subnetwork: “subnet_n”, n >= 0 communication node: “node_n”, n >= 0 simplex point-to-point link: “<src_node> -> <dest_node>” duplex point-to-point link: “<src_node> <-> <dest_node>” bus link: “bus_n”, n >= 0 bus tap: “<bus> - <node>” path: “<src_node> <-> <dest_node>” demand: “<src_node> <-> <dest_node>” |
|
| Units | ||
| Constraints | unique name, no dots, not “top” |
Number of Workstations
给定 LAN 中工作站的总数。每个 LAN 由若干工作站和一个内置服务器组成。
| Editing | Simulation | |
|---|---|---|
| Data Type | integer | integer |
| Access | read/write | read/write |
| Default Value | 10 | |
| Units | ||
| Constraints |
outline color
该属性指定出于在 Project Editor 中显示的目的而显示的子网周边轮廓的颜色。该属性对仿真没有影响。单击该属性的 Value 列会打开 Color Chooser。
“outline color” 的取值范围为 RGB000 到 RGB333,其中每一位都是 0 到 3(含)之间的整数。第一位越大,红色越多;第二位越大,绿色越多;第三位越大,蓝色越多。因此,RGB000 对应黑色,RGB333 对应白色,RGB300 对应红色,依此类推。
| Editing | Simulation | |
|---|---|---|
| Data Type | color | not applicable |
| Access | read/write | not applicable |
| Default Value | RGB133 | |
| Units | ||
| Constraints |
packet formats
该属性指定链路支持哪些数据包格式。这些格式必须与挂接节点中发送机和接收机所使用的格式相匹配;否则,链路在仿真过程中将无法工作。Project Editor 在链路一致性判定过程中使用该属性。链路一致性分析相互连接的节点与链路的兼容性。有关链路一致性的更多信息,参见第 7 章“Network Domain”第 292 页。
| Editing | Simulation | |
|---|---|---|
| Data Type | string | string |
| Access | read/write | read |
| Default Value | “all formatted,unformatted” | |
| Units | ||
| Constraints |
priority
该属性用于多个事件被安排在同一仿真时间时,决定它们的执行顺序。优先级较高的事件先执行。事件优先级按层次评估:子网优先级的权重高于节点优先级,节点优先级的权重又高于模块优先级。在评估发生在模块处的事件的优先级时,只考虑最低层父子网的优先级。
该属性不被并行仿真内核使用。
| Editing | Simulation | |
|---|---|---|
| Data Type | integer | integer |
| Access | read/write/promote | read/write |
| Default Value | 0 | |
| Units | ||
| Constraints | Abs value(priority) <= 32,000 |
propdel model
该属性指定一个已编译的管道过程的名称,该过程计算通过链路通信的发送机与接收机之间的传播时延。传播时延是将数据包第一个比特的发送与同一数据包第一个比特的接收分隔开的仿真时间。
- 对于点对点链路,默认模型只是把传播时延设置为等于链路 “delay” 属性的值。
- 对于总线链路,默认模型根据所关注的总线发送机与接收机之间的距离以及总线链路 “delay” 属性的值计算时延。
如果该属性设置为 NONE,则跳过该管道阶段,仿真内核将使用默认值,如“Pipeline Stage Definition”第 356 页所述。
有关收发器管道的更多信息,参见第 9 章“Communication Mechanisms”第 331 页。
| Editing | Simulation | |
|---|---|---|
| Data Type | typed file | string |
| Access | read/write | read |
| Default Value | point-to-point link: dpt_propdel bus link: dbu_propdel |
|
| Units | ||
| Constraints |
receiver
该属性将挂接节点中的一个总线接收机指定为通过所挂接总线到达的数据包的目的地。如果该属性的值设置为 NONE 或留空,则该节点不会通过该抽头接收数据包。在这种情况下,该抽头在图形上显示为从节点到总线链路的单向抽头(只发送抽头)。
该属性的取值指定为节点名称,后跟一个点(.)分隔符,再后跟总线接收机的名称。一个示例接收机取值是 node_0.br_0,其中节点名为 node_0,总线接收机名为 br_0。
| Editing | Simulation | |
|---|---|---|
| Data Type | enumerated | string |
| Access | read/write | read |
| Default Value | ||
| Units | ||
| Constraints |
receiver a
该属性指定第一个挂接节点中的哪个点对点接收机从双工点对点链路接收数据包。为使链路可以工作,该属性的值必须与节点模型内某个点对点接收机的名称相对应。该属性的取值指定为节点名称,后跟一个点(.)分隔符,再后跟点对点接收机的名称。例如,一个有效取值是 node_0.pr_0,其中节点名为 node_0,接收机名为 pr_0。
| Editing | Simulation | |
|---|---|---|
| Data Type | enumerated | string |
| Access | read/write | read |
| Default Value | ||
| Units | ||
| Constraints |
receiver b
该属性指定第二个挂接节点中的哪个点对点接收机从双工点对点链路接收数据包。为使链路可以工作,该属性的值必须与节点模型内某个点对点接收机的名称相对应。该属性的取值指定为节点名称,后跟一个点(.)分隔符,再后跟点对点接收机的名称。例如,一个有效取值是 node_0.pr_0,其中节点名为 node_0,接收机名为 pr_0。
| Editing | Simulation | |
|---|---|---|
| Data Type | enumerated | string |
| Access | read/write | read |
| Default Value | ||
| Units | ||
| Constraints |
right-angled
该属性指定用于绘制单工和双工点对点链路的 right-angled 属性。该属性对仿真没有影响。
| Editing | Simulation | |
|---|---|---|
| Data Type | toggle | not applicable |
| Access | read/write | not applicable |
| Default Value | disabled | |
| Units | ||
| Constraints | disabled, enabled |
role
该属性描述该对象所服务的用途。
| Editing | Simulation | |
|---|---|---|
| Data Type | string | not applicable |
| Access | read/write/promote | not applicable |
| Default Value | “” | |
| Units | ||
| Constraints |
Server Background Utilization
为该服务器指定平均基线负载。对于每个正在被服务的显式建模作业,都会计算表示背景负载影响的时延。
该表中的每个条目都有一个开始时间和一个背景利用率。该利用率一直适用,直到下一个条目的开始时间(对于最后一个条目,则适用到仿真结束)。
| Editing | Simulation | |
|---|---|---|
| Data Type | compound | compound |
| Access | read/write | read/write |
| Default Value | ||
| Units | ||
| Constraints |
Server Configuration
定义该服务器支持的应用服务。还允许为每个客户端应用配置服务器参数。
| Editing | Simulation | |
|---|---|---|
| Data Type | compound | compound |
| Access | read/write | read/write |
| Default Value | ||
| Units | ||
| Constraints |
Server Processing Speed Multiplier
服务器在一秒内处理的作业单元数量。服务器使用该数值计算请求响应速率。
| Editing | Simulation | |
|---|---|---|
| Data Type | double | double |
| Access | read/write | read/write |
| Default Value | 1.0 | |
| Units | ||
| Constraints |
Start Time
节点支持的每个应用的开始时间。
| Editing | Simulation | |
|---|---|---|
| Data Type | compound | compound |
| Access | read/write | read/write |
| Default Value | 100 | |
| Units | Seconds | |
| Constraints |
Stop Time
节点支持的每个应用的停止时间。
| Editing | Simulation | |
|---|---|---|
| Data Type | compound | compound |
| Access | read/write | read/write |
| Default Value | End of Simulation | |
| Units | ||
| Constraints |
Switching Speed
指定数据包从交换机处理器交换到相应输出端口的速率。通常,这是 LAN 中所使用交换机的速度。
| Editing | Simulation | |
|---|---|---|
| Data Type | double | double |
| Access | read/write | read/write |
| Default Value | 500 000 | |
| Units | packets per second | |
| Constraints |
symbol
该属性指定出现在对象每个线段中点处的图形符号。它对仿真行为没有影响。
| Editing | Simulation | |
|---|---|---|
| Data Type | enumerated | not applicable |
| Access | read/write | not applicable |
| Default Value | “none” | |
| Units | ||
| Constraints | none, circle, square, triangle, diamond |
TCP Maximum Segment Size
底层网络在不分片的情况下能够承载的最大报文段长度(MSS)。用于确定 TCP 发送的报文段大小。
| Editing | Simulation | |
|---|---|---|
| Data Type | integer | integer |
| Access | read/write | read/write |
| Default Value | 536 | |
| Units | bytes | |
| Constraints |
thickness
该属性指定绘制对象所用线条的粗细(以像素计)。它对仿真行为没有影响。
| Editing | Simulation | |
|---|---|---|
| Data Type | integer | integer |
| Access | read/write | read |
| Default Values | point-to-point link: 1 bus link: 5 bus tap: 1 path: 5 demand: 1 |
|
| Units | ||
| Constraints |
threshold
该属性影响对象在不同缩放级别下的显示特性。如果其值高于地图的当前分辨率,对象将以缩小的图标显示。通常,该属性用于确保网络图在较高缩放级别下不会因图标而显得杂乱。地图的当前分辨率可以在 Project Editor 中通过 View > Background > Set Properties 命令弹出的对话框确定。在顶层子网中,该属性以像素/度为单位测量;在所有其他子网级别中,以像素/子网单位为单位测量。
| Editing | Simulation | |
|---|---|---|
| Data Type | double | not applicable |
| Access | read/write | not applicable |
| Default Value | 0.0 | |
| Units | see description | |
| Constraints |
transmitter
该属性指定挂接节点中的哪个发送机作为要放入链路的数据包的源。该属性的取值指定为节点名称,后跟一个点(.)分隔符,再后跟总线发送机的名称。例如,一个有效取值是 node_0.pt_0,其中节点名为 node_0,发送机名为 pt_0。
对于总线抽头,如果该属性的值设置为 NONE 或留空,节点将通过该抽头发送数据包。在这种情况下,该链路在图形上显示为从总线链路到节点的单向抽头(“只接收”抽头)。
| Editing | Simulation | |
|---|---|---|
| Data Type | enumerated | string |
| Access | read/write | read |
| Default Value | ||
| Units | ||
| Constraints | must be unique |
transmitter a
该属性指定第一个挂接节点中的哪个点对点发送机作为双工点对点链路的源。为使链路可以工作,该属性的值必须与节点模型内某个点对点发送机的名称相对应。该属性的取值指定为节点名称,后跟一个点(.)分隔符,再后跟点对点发送机的名称。例如,一个有效取值是 node_0.pt_0,其中节点名为 node_0,发送机名为 pt_0。
| Editing | Simulation | |
|---|---|---|
| Data Type | enumerated | string |
| Access | read/write | read |
| Default Value | ||
| Units | ||
| Constraints |
transmitter b
该属性指定第二个挂接节点中的哪个点对点发送机作为双工点对点链路的源。为使链路可以工作,该属性的值必须与节点模型内某个点对点发送机的名称相对应。该属性的取值指定为节点名称,后跟一个点(.)分隔符,再后跟点对点发送机的名称。例如,一个有效取值是 node_0.pt_0,其中节点名为 node_0,发送机名为 pt_0。
| Editing | Simulation | |
|---|---|---|
| Data Type | enumerated | string |
| Access | read/write | read |
| Default Value | ||
| Units | ||
| Constraints |
Transport Protocol
节点支持的每个应用的传输协议。
| Editing | Simulation | |
|---|---|---|
| Data Type | compound | compound |
| Access | read/write | read |
| Default Value | Depends on application | |
| Units | ||
| Constraints |
txdel model
该属性是一个已编译的管道过程的名称,该过程计算与通过链路传输数据包相关的传输时延。传输时延是将数据包第一个比特的发送与同一数据包最后一个比特的发送分隔开的仿真时间。默认模型基于信道数据速率和数据包长度计算传输时延。
如果该属性设置为 NONE,则跳过该管道阶段,仿真内核将使用默认值,如“Pipeline Stage Definition”第 356 页所述。
有关收发器管道的更多信息,参见 Modeling Concepts(建模概念)第 9 章“Communication Mechanisms”第 331 页。
| Editing | Simulation | |
|---|---|---|
| Data Type | typed file | string |
| Access | read/write | read |
| Default Value | point-to-point link: dpt_txdel bus link: dbu_txdel |
|
| Units | ||
| Constraints |
unit
该属性包含子网内对象使用的单位。其取值是 OpT_Ima_Obj_Position_Unit_Type 取值之一(参见第 19 页表 68“Object Position Unit Type Symbolic Constants”)。
| Editing | Simulation | |
|---|---|---|
| Data Type | not applicable | integer |
| Access | not applicable | read |
| Default Value | ||
| Units | ||
| Constraints |
user id
该属性是一个整数,供用户自行用于标识目的。与 sys id 不同,它不一定具有唯一性,但它是可读写变量,你可以按任何需要的方式赋值。
| Editing | Simulation | |
|---|---|---|
| Data Type | integer | integer |
| Access | read/write/promote | read/write |
| Default Value | 0 | |
| Units | ||
| Constraints |
x position
该属性指定对象的水平位置。由于这些是固定对象,指定时的取值也就是整个仿真过程中的取值,且该值不能动态更改。该属性以父子网的单位指定。当单位为度时,它对应经度。正值表示东经度数,负值表示西经度数。
对于通信节点,该属性是指定位置的三个组成部分之一:x position、y position 和 altitude。该属性表示节点与其所在子网范围左边缘之间的距离。
对于子网,该属性指定子网范围中心的 x 坐标(也就是在 Project Editor 中显示子网图标位置的 x 坐标)。
| Editing | Simulation | |
|---|---|---|
| Data Type | double | double |
| Access | read/write | read |
| Default Value | ||
| Units | see description | |
| Constraints |
y position
该属性指定对象的垂直位置。由于这些是固定对象,指定时的取值也就是整个仿真过程中的取值,且该值不能动态更改。该属性以父子网的单位指定。当单位为度时,它对应纬度。正值表示北纬度数,负值表示南纬度数。
对于通信节点,该属性是指定位置的三个组成部分之一:x position、y position 和 altitude。该属性表示节点与其所在子网范围上边缘之间的距离。
对于子网,该属性指定子网范围中心的 y 坐标(也就是在 Project Editor 中显示子网图标位置的 y 坐标)。
| Editing | Simulation | |
|---|---|---|
| Data Type | double | double |
| Access | read/write | read |
| Default Value | ||
| Units | see description | |
| Constraints |