Creating the Topology
Note: ZigBee topologies cannot be created using the import features in the software (such as import from NetCollector or device configuration files). You must create these topologies manually.
When you create the network model, you can specify certain characteristics such as the geographic size of the model. Creating a network topology for ZigBee is similar to creating any other network topology. You can set the geographic size of the model in the Startup Wizard; to do so, use the following settings in the wizard:
- Initial Topology – Choose “Create Empty Scenario”
- Choose Network Scale – Choose “Enterprise”, “Campus”, or “Office”. You will be prompted for the dimensions of the network.
You can add nodes to your network model several ways:
- By selecting ZigBee devices in the Object Palette and adding them to the Project Editor workspace
- By using the Topology > Rapid Configuration… command from the menu bar to specify and build a complete network topology
If you want to include the effects of the terrain on the ZigBee network, you can model the terrain, as described by “Enabling Terrain Effects in a Simulation” in the Terrain Modeling Module User Guide.
The model supports three types of ZigBee topologies: tree, star, and mesh. Using the default settings, the network will try to form a tree topology, but you can configure other types of topologies in the Network Parameters attribute.
Creating a Tree Topology
To create a tree topology in a single personal area network (PAN), place one coordinator node and the desired number of router and end devices in the workspace. With the default attribute settings, each router can accommodate about two end devices. On each device, set the Network Parameters attribute to Default Tree Network. If you want greater control over the characteristics of the tree topology (such as the number of children, routers, or depth) expand the Network Parameters to specify these parameters.
Creating a Star Topology
To create a star topology in a single PAN, place one coordinator node and the desired number of end devices in the workspace. On each device, confirm that the Network Parameters attribute is set to Default Star Network.
Creating a Mesh Topology
To create a mesh topology in a single PAN, place one coordinator node and the desired number of end devices in the workspace. On each device, confirm that the Network Parameters attribute is set to Default Mesh Network.