Adding Traffic to the ZigBee Network Model

After you have created the network topology, you can add traffic to the ZigBee network. All ZigBee device models and IP host applications can send and receive ZigBee application traffic (other types of traffic are not supported). ZigBee gateway nodes transfer ZigBee application traffic between ZigBee and IP networks. However, ZigBee gateway nodes cannot be configured as a traffic source or a traffic destination.

ZigBee devices originating traffic can request application layer acknowledgments from ZigBee destinations for packets transmitted within the ZigBee network. Application hosts on an IP network neither request nor send acknowledgments. When packets are sent to application hosts on an IP network (IPHA) from ZigBee devices, ZigBee gateway nodes send application layer acknowledgments to end devices. Similarly, ZigBee gateway nodes can request acknowledgments for packets sent from IPHA to ZigBee devices.

The application traffic attributes let you send traffic to multiple destinations. You can characterize the traffic by specifying the traffic start time, packet size, packet inter-arrival time, and duration for each destination.