Model Architecture: SDN

The following diagram illustrates the relevant portions of the SDN switch node model.

Figure 480: SDN Switch Node Model Architecture

SDN Switch Node Model Architecture

Process Models

The SDN model uses the following process models.

Table 198: SDN Process Models

Process Description
openflow_mgr Implements the OpenFlow protocol and is responsible for translating OpenFlow messages between the controller and generic switch module.
sdn_switch Root process of the sdn_switch module. This process spawns the sdn_switch_mre child process.
sdn_switch_mre Pipeline processing takes place in this process model. The flow, meter, and group tables reside here.
For ease of customization, the sdn_switch_mre process performs generic SDN functionality in the event that the openflow_mgr process uses any protocol other than OpenFlow to interface with a controller.

The following tables summarize the communication between the process models of switch and manager modules via interrupts.

Table 199: Interrupts from Switch Module to Manager Module

Code ICI Type (ICI Field) Primary Code (ICI Field) Secondary Code (ICI Field) Description
Remote
SDNSC_SWITCH_NOTIFICATION sdn_switch_notification SdnsC_Error_Notification Error Type Error Code Error reporting
SdnsC_Flow_Removal_Notification Reason Not Used Flow removal notification
SdnsC_Stat_Info_Notification Statistic Type Number of Matching Entries Response to statistics queries (sent as a forced interrupt)
SdnsC_Port_Status_Notification Port's Stream Index Indication of Failure or Recovery Port change reporting
Stream
n/a sdns_packet_in_info n/a n/a n/a Packet-in message

Table 200: Interrupts from Manager Module to Switch Module

Code ICI Description
Remote
SDNSC_FLOW_TABLE_MOD_REQ sdns_flow_table_mod_req Add/Delete/Modify flows
SDNSC_GROUP_TABLE_MOD_REQ sdns_group_table_mod_req Add/Delete/Modify groups
SDNSC_METER_TABLE_MOD_REQ sdns_meter_table_mod_req Add/Delete/Modify meters
SDNSC_STAT_INFO_REQ sdn_switch_request Statistical information request
Stream
n/a sdns_packet_out_info Packet-out message

Viewing the Tables of an SDN Switch in ODB

Flow, group, and meter tables of an SDN switch can be printed in ODB when desired by executing the diagnostic block of the sdn_switch_mre process model for a given node at the time of interest with the proldiag command. If the trace label "sdns_stats" is enabled when the diagnostic block is executed, then the labels will be printed with relevant statistical information. All of the SDN-related ODB trace labels are listed in the following table.

Table 201: Trace Labels Available to ODB proldiag Command

Label Description
openflow General label for the entire OpenFlow process.
sdns_pkt_processing Packets' switching and matching in flow table(s) information.
sdns_pkt_processing_detailed Packets' switching and matching in flow table(s) information with more details about matched flows.
sdns_stats Used in diagnostic block to display the current flow, group, and meter tables with statistical information.
sdns_tables Add/modify/delete operations with flow, group, and meter tables.

本站文档由 北京智网畅联科技有限公司 整理、翻译并提供 · Documentation compiled and provided by Beijing ZNetLink Technology Co., Ltd.

交流群 · QQ Group:OPNET/智网妙算网络仿真交流群(群号 486383494)

原文档 © 2017 Riverbed Technology · 本站为公益翻译,由 AI 辅助完成,请仔细甄别

Original documentation © 2017 Riverbed Technology. Community translation, AI-assisted. Contact: jiazequn@znetlink.com