Channel to Controller
The channel to controller is a TCP connection through which an SDN switch communicates with the controller. Through this connection, the controller configures and manages the switch, receives events from the switch, sends packets out of the switch for topology discovery, and queries the counters of the switch. The physical connection between the SDN switches and the controller is through the same network that is managed by the SDN switches (i.e., "in-band controller connection").
Even though the switches do not support fail standalone mode, as they are not hybrid switches, they will continue to operate in fail secure mode if the connection to the controller is lost. This means that the switch will continue to forward traffic based on its current flow table entries while honoring any flow entry expiries. Additionally, the switch will attempt to periodically re-establish the connection with the controller while disconnected. This enhances robustness of the switches to operate in a network where outages may occur. Furthermore, link failures/recoveries can be studied along with SDN switches.