Using Confederations

BGP confederations are used to reduce the required number of IBGP connections in an autonomous system. Set up confederations in your network model by configuring individual routers to belong to the appropriate confederation, as described in the following procedure.

Procedure 24: Configuring a Router to Belong to a Confederation

  1. Specify the confederation identifier and peers.

    1.1 In the router’s IP Routing Protocols > BGP Parameters > Instances. Add a row to the Instances table and select Global from the Routing Instance/VRFName field.

    1.2 Set the Instance Properties > Confederation Configuration > Confederation ID attribute.

    1.3 Specify the member AS numbers (as comma-separated values) of the other autonomous systems in the confederation in the Confederation Peers attribute.

  2. Specify the member AS number of the autonomous system this router belongs to in the IP > IP Routing Parameters > Autonomous System Number attribute.

  3. Specify the IP Routing Protocols > BGP Parameters > Neighbors > Remote AS attribute as follows:

    • Member AS number—for neighbors in the same confederation
    • Confederation ID—for neighbors other confederations

End of Procedure 24