Model Features: BGP

The BGP model supports the following protocol features.

Table 25: BGP Model Features

Feature Description
Neighbor configuration IBGP (Internal BGP) and EBGP (External BGP) neighbors can be configured for a BGP router.
Routing policies A router can be configured with multiple routing policies. These routing policies can be applied to neighbors to restrict outgoing or incoming routes or to modify the attributes of advertised routes.
The following attributes can be checked or modified in route maps:
• IP Address
• AS Path
• Communities
• Local Preference
• Degree of Preference
• Multi Exit Discriminator
• Weight
Route filtering Route filtering, on prefix lists and AS path lists, is supported on a per-router or per-neighbor basis.
Redistribution Routes can be redistributed between BGP and other routing protocols. You can use route maps to restrict or change the attributes of routes redistributed into BGP according to the following:
• Next hop
• Metric
• Route type (Internal or External)
• Destination’s IP address
Advertised destinations A BGP router can be configured to advertise additional routes. That is, the router can add routes that may not be included in the routes received from neighbors and other routing protocols.
Conditional route advertisements Conditional route advertisements are used by BGP neighbors to restrict the announcements of route prefixes, based on the presence (using the “exist-map” keyword) or absence (using the “non-exist-map” keyword) of a route.
Confederations Large autonomous systems may be split into smaller member autonomous systems to reduce the required number of IBGP peering sessions.
Route Reflectors The use of route reflectors to reduce the IBGP mesh is supported.
Timers The following timers are modeled.
• Hold Timer. The value of this timer is the maximum interval during which the routes advertised by a peer will be valid without a keepalive or an update packet coming from the peer. The hold timer is started once the connection to the peer is established and it will be periodically reset every time a keepalive or an update packet is received from the peer.
• Keep Alive Timer. This timer value is not taken from an attribute, but is modeled internally as one third of the value of the Hold Timer.
• Connect Retry Timer. Time between successive attempts to open a TCP connection with a neighbor. This timer is canceled once the TCP connection is successfully established.
• Min Route Advertisement Interval. Minimum amount of time that must elapse between advertisements of routes to a particular destination from a single BGP speaker.
• Min AS Origination Interval. Minimum amount of time that must elapse between successive advertisements of UPDATE messages that report changes within the advertising BGP speaker's own autonomous systems.
• Scan Period. The period between two successive BGP scans. A BGP scan determines the metric changes to routes specified in the Network Reachability Attribute and advertises them via UPDATE messages. It also detects if previously unreachable neighbors have become reachable and triggers the connection establishment mechanism.
Message Priority You can set the priority of BGP messages exchanged in the entire network by specifying the DSCP marking of the messages using the corresponding global attribute. The default value is CS6.