Modeling Traffic in a MANET Network

When your MANET network model is built and routing protocols are configured, you can introduce traffic into the model. You can do this through the use of:

Standard Applications

You can configure standard applications, such as FTP and Email, to generate simulated traffic in your network model. For more information on the Application Config utility node, see “Applications”.

Raw Packet Generation

MANET stations can perform raw packet generation in the network model. To configure raw packet generation, right-click on a MANET station in the Project Editor, and select Edit Attributes. Expand “MANET Traffic Generation Parameters”, and configure your desired parameters, as shown in the following figure.

Figure 368: Raw Packet Generation

Raw Packet Generation

Using Traffic Demands

There are two ways to configure demands in your MANET network model.

  • Choose an IP demand from the “demands” object palette
  • Create traffic flows from the Traffic menu

You can find out more about how to introduce traffic demands and flows in your network in “Modeling Network Traffic”.

本站文档由 北京智网畅联科技有限公司 整理、翻译并提供 · Documentation compiled and provided by Beijing ZNetLink Technology Co., Ltd.

交流群 · QQ Group:OPNET/智网妙算网络仿真交流群(群号 486383494)

原文档 © 2017 Riverbed Technology · 本站为公益翻译,由 AI 辅助完成,请仔细甄别

Original documentation © 2017 Riverbed Technology. Community translation, AI-assisted. Contact: jiazequn@znetlink.com