oms_wp_phy_module_initialize_multi_carrier()

Abstract

Initializes the PHY module in multi-carrier mode.

Syntax

oms_wp_phy_module_initialize_multi_carrier (phy_module_name)

Argument Type Description
phy_module_name const char* Name of the PHY module within the node model
The default name is “phy” when using the modules as provided.

Return Type

OmsT_WP_Phy_Handle*

Details

This function may be called by the PHY module client to indicate that the PHY module will be used for multi-carrier transmissions, and that there will be further initialization information to be passed on so the PHY module will hold its initialization until such information is provided in a future event. This function must be called by the client process model in an event that is later than the event of “begsim” interrupt.

The information will be communicated by first setting the PHY handler properties calling oms_wp_phy_module_attr_set(), and then calling oms_wp_phy_module_activate() to commit the changes to the PHY module and proceed with its initialization.

The function returns a handle to the PHY module that can be used with other oms_wp_phy functions.

Note: When using the advanced wireless package in multi-carrier mode, you must use this function to initialize the PHY module properly.

Example

Excerpt from lte_enb_as process model, init enter execs.

/* Form the name of the associated PHY layer module based on the sector 	*/
/* number.								*/
if (sector_id == -1)
	sprintf (phy_module_name , "phy");
else
	sprintf (phy_module_name, "phy_%d", sector_id - 1);

/* Initialize the wireless PHY module as multicarrier. Store the PHY 	*/
/* module handle.							*/
phy_module_hdl = oms_wp_phy_attr_module_intialize_multi_carrier(phy_module_name);

本站文档由 北京智网畅联科技有限公司 整理、翻译并提供 · Documentation compiled and provided by Beijing ZNetLink Technology Co., Ltd.

交流群 · QQ Group:OPNET/智网妙算网络仿真交流群(群号 486383494)

原文档 © 2017 Riverbed Technology · 本站为公益翻译,由 AI 辅助完成,请仔细甄别

Original documentation © 2017 Riverbed Technology. Community translation, AI-assisted. Contact: jiazequn@znetlink.com