How To Find and Install Terrain Data
You can install as many terrain data files as your needs dictate and your system memory can hold. Terrain data for different areas is available from a variety of sources.
Obtaining Terrain Data
Terrain data compatible with Terrain Modeling Module (TMM) is available from a variety of sources. The following two free sources can be found on the Internet.
-
World coverage in DTED format:
164.214.2.59/geospatial/digital_products.htm (the National Imagery and Mapping Agency web site, www.nima.mil)
**Note—**DTED data uses four types of files for each region. TMM requires only one of these files—those with the suffix
.dt0or.dt1(depending on level). -
U.S. Geological Survey Digital Elevation Model (USGS DEM):
edcwww.cr.usgs.gov/doc/edchome/ndcdb/ndcdb.html (the U.S. Geological Survey web site, www.usgs.gov)
TMM supports the terrain data file formats listed in the following table.
Table 1: Terrain Data File Formats
| Format | Description |
|---|---|
| DTED level 0 | spacing is 30 arc seconds (latitude) by 30 arc seconds (longitude) |
| DTED level 1 | spacing is 3 arc seconds (latitude) by 3 arc seconds (longitude) |
| DTED level 2 | spacing is 1 arc second (latitude) by 1 arc second (longitude) |
| 15-minute DEM data (corresponds to the USGS 1:63,360 scale topographic quadrangle map) |
spacing between elevations along profiles is 2 arc seconds (latitude) by 3 arc seconds (longitude) |
| 2-arc-second DEM data (covers 30-minute by 30-minute areas) |
spacing of elevations along and between each profile is 2 arc seconds |
| 1-degree DEM data (also referred to as 3-arc-second or 1:250,000 scale DEM data) |
3- by 3-arc-second data spacing |
| OpenFlight ¹ ² | public domain file format for terrain and terrain features |
| MetaFlight ¹ ² | public domain file format for terrain, terrain features, and related information |
Note 1: The 3DNV module and a 3DNV license is required to use these formats.
Note 2: Supported on Windows only.
In addition to the supported formats, you can create custom terrain handlers for any formats you might need. See “Creating Your Own Terrain Handler” on page 36 for details.
Installing Terrain Data
To install terrain data, simply save it somewhere on your hard drive. You will specify the location to TMM when you use the data, as described in “Creating a Terrain Specification” on page 9.
Note: When you add new terrain data directories or files, you must update the program’s knowledge of available terrain files by choosing Topology > Terrain > Rebuild Terrain Data Catalog.