Types of Intervisibility
VR-Vantage supports the following types of intervisibility:
- Point-to-point (intervisibility line)
- Intervisibility fan
- Entity intervisibility
The intervisibility fan and entity intervisibility are displayed as a circular area. However, intervisibility calculations are made within a cylindrical area extending above and below the terrain, so that intervisibility calculations can be made for air platform entities and subsurface entities. Intervisibility lines might pass through the terrain.
Point-to-Point Intervisibility
Point-to-point intervisibility (Figure 81) shows the line-of-sight between any two points. The portion of the line that is visible from the starting point is green. The portion that is not visible is red. You can change the colors used.
Figure 81: Point-to-point intervisibility

Intervisibility Fan
An intervisibility fan (Figure 82) shows a series of lines radiating from the center of a circle to its outer edge. Each ray shows intervisibility along its path from the origin to the border. You can configure the distance between rays. (For details, please see Configuring Intervisibility Lines and Fans.)
Figure 82: Intervisibility fan

Entity Intervisibility
Entity intervisibility (Figure 83) shows which entities are visible from the center of a defined area and whether or not the entities can see the center point. If you center the intervisibility circle on a point on the terrain, you can see which entities can see that point. If you lock the circle to an entity, you can see which entities can see that entity and which it can see. (For details, please see Configuring Intervisibility Lines and Fans.)
Figure 83: Entity intervisibility
