Interface Information
This compound attribute configures IS-IS parameters on a per-interface basis. The configurable attributes that affect simulation results are described below.
Figure 305: Configuring Per-interface IS-IS Parameters

- Process Tag. Specifies the IS-IS process to which this interface belongs.
- Circuit Type. Configures the interface to do Level-1, Level-2, or Level-1-2 routing. If the router’s system type is Level-1-2, any circuit type is valid. Otherwise the circuit type must match the value specified in the System Type attribute.
- Priority. Specifies the priority of this router interface to become the Designated Intermediate System, DIS.
- Metric. Specifies the cost of using the interface at each level. The metric is used for routing table computations. If the router’s Wide Metric attribute is set to Enabled, the maximum Metric value is 16777215 (3-byte metric). Otherwise the maximum metric value is 63 (6-bit metric).
- Timers. Configures timers governing packet generation and retransmission on this interface. Most timers are configured separately for each level.